Használati útmutató Nedis WIFICDP10GY

Nedis Ajtócsengő WIFICDP10GY

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Nedis WIFICDP10GY (32 oldal) a Ajtócsengő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/32
WIFICDP10xx
Wi-Fi video doorphone
Quick Start Guide (EN)
Verkorte handleiding (NL)
Kurzanleitung (DE)
Guía de inicio rápido (ES)
Guide de démarrage rapide (FR)
Guida rapida (IT)
Guia de iniciação rápida (PT)
Hurtigstartsguide (DA)
Hurtigstartsguide (NO)
Snabbstartsguide (SV)
Pikaopas (FI)
Γρήγορος οδηγός (EL)
Krótki przewodnik (PL)
Rychlá příručka (CS)
Gyors útmutató (HU)
Ghid rapid (RO)
Hızlı başlangıç kılavuzu (TR)
2
MICRO SD RESET
3
4
2
1
8
65
7
English
3
WIFICDP10xx
Wi-Fi video doorphone
Description
1. Doorbell button
2. Status indicator
3. Camera
4. Microphone
5. Speaker
6. Reset button
7. Memory card slot (microSD)
8. External power port
Safety
To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
Disconnect the product from the mains and other
equipment if a problem should occur.
Read the manual carefully before use. Keep the
manual for future reference.
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
Use
1. Download and install the app “Nedis SmartLife from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app “Nedis SmartLife”.
3. Create a new account or log in to your existing
account.
4. Tap “+” to add the device.
5. Select “Security Camera” from the list of products.
6. Optional: Insert a memory card into the memory card
slot.
7. Connect the external power (8-24VAC) through the
bracket (and the angle adjuster) to the rear of the
unit. The transformer of your existing wired doorbell
can often be used to power the device.
8. If the status indicator does not ash: Press the reset
button.
If the status indicator ashes: Conrm in the app.
9. Conrm the Wi-Fi network and password.
10. Enter the device name.
Note: The device name will also be used for push
notications.
11. Mount the bracket (and the angle adjuster) on the
required location using the screws.
12. Place the camera into the bracket (top rst) and lock
the camera with the bolt in the bottom of the
bracket.
Cleaning and maintenance
Warning!
Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
Contact
NEDIS B.V., De Tweeling 28, 5215 MC s-Hertogenbosch,
The Netherlands

Termékspecifikációk

Márka: Nedis
Kategória: Ajtócsengő
Modell: WIFICDP10GY

Szüksége van segítségre?

Ha segítségre van szüksége Nedis WIFICDP10GY, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Ajtócsengő Nedis

Útmutatók Ajtócsengő

Legújabb útmutatók Ajtócsengő