Használati útmutató Omega Speedmaster Racing

Omega óra Speedmaster Racing

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Omega Speedmaster Racing (2 oldal) a óra kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.8 csillagra

Oldal 1/2
1 / 2
SPEEDMASTER
RACING CO-AXIAL CHRONOGRAPH 40 MM
Steel on steel
Caliber
3330 326.30.40.50.11.001
VCo-Axial escapement
]Si14 silicon balance spring
lAutomatic
UChronometer
ZTachymeter
oSapphire crystal
tAnti-reflective treatment on both sides
F4-year International Warranty
TWater-Resistant to a relative pressure of 10 bar
(100 metres/330 feet)
WATCH FUNCTIONS
The crown has 2 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 45 hours or more, wind it
up with the crown in position 1.
2. Time setting: hours – minutes – seconds. Pull the crown out to position 2. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
Correcting the date:press the corrector (C) positioned at 10 o’clock.
CHRONOGRAPH FUNCTIONS
• Pusher A: start – stop, start – stop, etc
Timing to 1/8 of a second for up to 12 hours.
• Pusher B: reset (after a stop).
2 / 2
TACHYMETRIC SCALES
The desired information is read between the central seconds hand of the
chronograph and the corresponding scale, over a maximum duration of 60
seconds.
Example: calculating the speed of a car.
Record the time the car takes to cover a distance of 1 kilometre. Read off the
tachymetric scale the speed indicated by the central seconds hand. In this case,
the car is travelling at 120 km/h.

Termékspecifikációk

Márka: Omega
Kategória: óra
Modell: Speedmaster Racing

Szüksége van segítségre?

Ha segítségre van szüksége Omega Speedmaster Racing, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek