Használati útmutató Onkyo SKF-3600

Onkyo hangszóró SKF-3600

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Onkyo SKF-3600 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
En
Speaker System
SKF-3600
Instruction Manual
Thank you for your purchase of the Onkyo speaker
system.
Please read this manual thoroughly before using it.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new speaker system.
Please retain this manual for future reference.
Contents
Supplied accessories 2
Using the included
speaker bases 2
Placement 2
Connections 3
Precaution on use 3
Speaker care 4
Use with a TV set or
computer 4
Specifications 4
2
SKF-3600 (front speaker)
× 2
Speaker cord
× 2 (red, white: 3.5m)
Speaker base
× 2
Screws
× 6
Front left and right speakers
Output overall sound. They play the most important role
in a home theater system, by creating basic sound
images and fields.
Place the front speakers in front of the listener so that
they point to the listener’s ears in the listening position
for music and movies. Ideal speaker placement is so that
they are located symmetrically.
The speaker cabinet is made of wood and sensitive to
extreme temperatures and humidity. Avoid placing the
speaker system in locations subjected to direct sunlight
or in humid places such as near an air conditioner, bath-
room, or kitchen.
Before making speaker connection, attach the supplied
speaker bases to the SKF-3600.
1. Turn the speaker upside down.
2. Match the screw halls on the speaker base to those
on the speaker, and fix the base to the speaker using
screws.
SAFETY PRECAUTIONS:
• When attaching the speaker bases, work with them on
a flat, level, and solid floor.
• After attached the speaker bases, verify that the
speakers stand upright and stably.
Using the speaker cable hook
The supplied speaker base has a speaker cable hook. It
is recommended that you hook the cables on the hook to
avoid cable congestion.
Supplied accessories
Placement
Using the included speaker bases
3
• Be sure to turn off your amplifier before connecting
the speaker system. Connecting it while the amplifier
is on may result in damage to the amplifier or the
speaker system.
• The nominal impedance of this speaker system is 8
Ω
.
Use only amplifiers capable of handling this imped-
ance.
• Use the supplied speaker cables to connect between
the speaker’s input terminals and the amplifier’s
speaker terminals as illustrated below.
• Be sure to connect the Right and Left speakers with
the amplifier’s corresponding speaker terminals.
Also, be sure that you are connecting the speaker’s
positive (+) and negative (–) input terminals with the
amplifier’s corresponding positive and negative
speaker terminals. Otherwise, undesirable sound field
or impaired bass-range reproduction will result.
• Before turning on the amplifier’s power switch, pull
lightly on the speaker cables to ensure that they are
connected securely.
• To prevent damage to circuitry,
never short-circuit the positive
(+) and negative (–) speaker
wire.
• This speaker system can handle the specified input
power when it is used for ordinary music reproduc-
tion. If the following abnormal signals are fed to the
speaker, however, an overcurrent may flow in the
internal circuits, causing burning or breakage of the
wires even if the input power is below the specified
rating.
1. Noise produced when FM station is not tuned in
2. Sound produced when fast-forwarding cassette
tape deck
3. High-frequency sound generated by an oscillator,
an electronic musical instruments, etc.
4. Oscillating amplifier signals
5. Special test signals produced by audio checking
CD, etc.
6. Sound produced when connecting or disconnect-
ing audio connection cables (Always turn off the
amplifier’s power before connecting or discon-
necting cables.)
7. Howling when a microphone is used
• Do not place magnetic objects such as screwdrivers
and iron parts near the speaker system since they use
speakers with strong magnets. Otherwise, the objects
may be attracted, causing injury or damaging the dia-
phragm.
Connections
SURRO UND BACK
SPEAKER
FRONT
SPEAKERS SURROUND
SPEAKERS CENTER
SPEAKER
R
L
R
L
A B
R
L
SKF-3600
Front right
speaker
SKF-3600
Front left
speaker
SKC-3600
Center speaker
SKM-3600
Surround right
speaker
SKM-3600
Surround left
speaker
Red White
1. Strip the insulation of speaker
cables, and twist the core wires
tightly.
2. While pressing the lever, insert
the wire into the hole, and then
release the lever.
3. Make sure that the terminals
are gripping the core wires, not
the insulation.
Both SKC-3600 and SKM-3600 come with SKS-3600.
Precaution on use

Termékspecifikációk

Márka: Onkyo
Kategória: hangszóró
Modell: SKF-3600

Szüksége van segítségre?

Ha segítségre van szüksége Onkyo SKF-3600, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Onkyo

Onkyo

Onkyo D-407M Útmutató

16 Szeptember 2024
Onkyo

Onkyo HTP-L50 Útmutató

30 Augusztus 2024
Onkyo

Onkyo HT-S3405 Útmutató

14 Augusztus 2024
Onkyo

Onkyo HTP-2S Útmutató

7 Augusztus 2024
Onkyo

Onkyo D-407F Útmutató

2 Augusztus 2024
Onkyo

Onkyo D-309H Útmutató

1 Augusztus 2024
Onkyo

Onkyo SKS-HT230 Útmutató

29 Július 2024
Onkyo

Onkyo SKR-L500 Útmutató

28 Július 2024
Onkyo

Onkyo SKS-101 Útmutató

27 Július 2024
Onkyo

Onkyo Smart Speaker G3 VC-GX30 Útmutató

26 Július 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025