Használati útmutató PAC RadioPRO 4 RP4.2-HY12

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PAC RadioPRO 4 RP4.2-HY12 (7 oldal) a rádió kategóriában. Ezt az útmutatót 18 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.0 csillagra

Pacic Accessory Corporation

® | Ph. 866-931-8021 | support@pac-audio.com

©2015 Pacic Accessory Corporation

www.pac-audio.com

Pifi ACti

RP4.2-HY12

Radio Replacement &

Steering Wheel Control Interface

for Hyundai Veloster

Rev. 101515

Page 1

Introduction & Features

Important Notes

The RP4.2-HY12 interface allows the replacement of a factory radio in the Hyundai Veloster. Using this interface will

retain factory features such as: steering wheel controls (SWC), secondary screens, reverse camera and factory SPDIF

audio amplier (seperate part required, part # RPA-SPDIF) whenever the original radio is removed. Use of this interface

also allows you to program two radio functions to each SWC button by using short press long press dual command

functionality. The RP4.2-HY12 also provides data bus driven outputs such as vehicle speed sense (VSS), illumination,

reverse trigger and parking brake.

1. Does not retain Blue Link. You must use the RP5.2-HY12 to retain Blue Link.

2. The AUX connection in the RP4 harness will only provide sound if the aftermarket radio has a USB port. This is because the

USB port provides the power to make the factory USB/AUX port work. If you have connected the USB plug to your aftermarket

radio and it is still inoperable, this means that the aftermarket radio’s USB port is not supplying enough current.

3. When using the RPA-SPDIF in factory amplied vehicles, you can adjust factory amplier settings such as Bass, Mid, Treble,

Fader, Balance and Gain with the RadioPRO app found at www.pac-audio.com. Please refer to page 6 for detailed instructions

on the app and the functionality of this wire.

4. In vehicles equipped with auto climate controls, you will lose the fan mode, fan speed, auto status and temperature display.

Wiring Connection Chart

3.5mm JackSWC Output

PinkMS-CAN + Input

Pink/BlackMS-CAN - Input

Blue/YellowSWC Output

Red/White12v+ Programmable

Output (1 amp)

Orange/WhiteIllumination Output

PinkVehicle Speed

Sense Output

Violet/WhiteReverse Output

White/BlackHS-CAN + Input

White/RedHS-CAN - Input

WhiteAnalog SWC

Orange/BlackIllumination Input

Light GreenParking Brake

Output (-)

Blue/WhiteAmp Turn On Input

Interface Connector 2

YellowBattery +12v

Black Ground

BluePower Antenna

Turn On Input

WhiteFront L + input

White / BlackFront L - input

GreyFront R + input

Grey / BlackFront R - input

GreenRear L + input

Green / BlackRear L - input

PurpleRear R + input

Purple / BlackRear R - input

Yellow RCAFactory Reverse

Camera Video (if

equipped)

Vehicle ConnectorInterface Connector 1

RedAccessory Output

(10 amp)

Yellow 12v+

Black Ground

RedAccessory Output

Termékspecifikációk