Használati útmutató Panduit R4PFL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panduit R4PFL (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/2
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2010 CM486
Finger Cable Managers for 4 Post Racks
Part Number(s): R4PFL,R4PFR
R4PFL R4PFR
(4) #12-24 X 12” Hex Head
Bonding Screws
(included with both R4PFL
and R4PFR)
Note: R4PFL and R4PFR are sold separately.
R4PFL Installation:
The R4PFL may be installed anywhere on the outside of the left front post where a server or equipment will be installed.
For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-
ing Screws. Be sure that finger flags are pointing upward. See Figure 1.
If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and
fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 2.
R4PFL
Finger flags
pointing upward
#12-24 X 1/2” Hex
Head Bonding Screws
Vertical Patch Panel Bracket
(CVPPB)
Front of rack
Front of rack
Figure 1 Figure 2

Termékspecifikációk

Márka: Panduit
Kategória: nincs kategorizálva
Modell: R4PFL

Szüksége van segítségre?

Ha segítségre van szüksége Panduit R4PFL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek