Használati útmutató Panduit S52SPS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Panduit S52SPS (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 3 felhasználó értékelte átlagosan 4.7 csillagra

Oldal 1/2
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 V00029CC Rev. 02
Page 1 of 2
N
ET
-A
CCESS
S-Type Server Cabinets
(Side Panels - S21SPSE, S51SPSE, S22SPSE, S52SPSE,
S81SPSE, S82SPSE, S11SPSE, S12SPSE)
Side Panel Support Bracket Installation
-Secure Side Panel Support Bracket to cabinet frame with [4] M5 Torx Screws
[4] M5 x 12mm Screws
(use T25 Torx bit)
[2] Nut Plates
Side Panel Support Bracket
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
www.panduit.com
INSTALLATION INSTRUCTIONS V00029CC Rev. 02
Page 2 of 2
Spring Loaded Hinge Pin
(Top and Bottom)
Move Finger Pull into
Slot to Lock Hinge Pin
in OPEN position
Spring Loaded Hinge Pins
Spring Loaded Hinge Pins
[2] Locations
Front Side Panel Rear Side Panel
Adjust Fit of Side Panels
Use included wrench to raise
or lower adjustment bushings
Side Panels removed
from view to add clarity
Adjustment
Bushing
Adjustment
Wrench
(included)
Side Panels (Removal/Installation and Adjustment - optional)
- Pull and release [4] Spring Loaded Hinge Pins to install Front Side Panel onto cabinet frame
- Pull and release [2] Spring Loaded Hinge Pins to install Rear Side Panel onto cabinet frame
- Close rear side panel and set both locks to LOCKED position
REVERSE STEPS to remove In-Row Side Panels

Termékspecifikációk

Márka: Panduit
Kategória: nincs kategorizálva
Modell: S52SPS

Szüksége van segítségre?

Ha segítségre van szüksége Panduit S52SPS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek