Használati útmutató PeakTech 1336
Olvassa el alább 📖 a magyar nyelvű használati útmutatót PeakTech 1336 (61 oldal) a méret kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/61
2
1.General Safety Requirements………………. ……………………………………..….…… 3
2. Safety Terms and Symbols ........................................................................................ 4
3. Quick Start .................................................................................................................. 6
Introduction to the Structure of the Oscilloscope ................................................................... 6
Front Panel .............................................................................................................................................. 6
Rear Panel ............................................................................................................................................... 7
Control Area ............................................................................................................................................ 8
User Interface Introduction ......................................................................................................... 9
How to Implement the General Inspection .............................................................................. 11
How to Implement the Function Inspection ............................................................................ 11
How to Implement the Probe Compensation .......................................................................... 12
How to Set the Probe Attenuation Coecient ........................................................................ 13
How to Use the Probe Safely .................................................................................................... 14
How to Implement Self-calibration ........................................................................................... 14
Introduction to the Vertical System ......................................................................................... 14
Introduction to the Horizontal Syst em .................................................................................... 15
Introduction to the Trigger System .......................................................................................... 16
4. Advanced User Guidebook ...................................................................................... 18
How to Set the Vertical System ................................................................................................ 19
Use Mathematical Manipulation Function ............................................................................... 20
The Waveform Calculation ...................................................................................................................... 20
Using FFT function . ................................................................................................................................ 21
Use Vertical Position and Scale Knobs ................................................................................... 24
How to Set the Horizontal System ........................................................................................... 24
Zoom the Waveform ............................................................................................................................... 25
How to Set the Trigger System ................................................................................................ 25
Single Trigger ......................................................................................................................................... 26
Alternate Trigger (Trigger mode: Edge) .................................................................................................. 28
How to Operate the Function Menu ......................................................................................... 29
How to Set the Sampling/Display ............................................................................................................ 29
How to Save and Recall a Waveform ..................................................................................................... 31
How to Implement the Auxiliary System Function Setting ....................................................................... 35
How to Update your Instrument Firmware .............................................................................................. 37
How to Measure Automatically ............................................................................................................... 38
How to Measure with Cursors ................................................................................................................. 42
How to Use Executive Buttons ................................................................................................................ 45
5. Communication with PC ........................................................................................... 48
6. Demonstration .......................................................................................................... 49
3
Example 1: Measurement a Simple Signal .............................................................................. 49
Example 2: Gain of a Amplier in a Metering Circuit ............................................................. 50
Example 3: Capturing a Single Signal ..................................................................................... 51
Example 4: Analyze the Details of a Signal ............................................................................ 52
Example 5: Application of X-Y Function ................................................................................. 53
Example 6: Video Signal Trigger .............................................................................................. 55
7. Troubleshooting ....................................................................................................... 56
8. Technical Specications .......................................................................................... 57
General Technical Specications ............................................................................................ 60
9. Appendix ................................................................................................................... 60
Appendix A: Enclosure ............................................................................................................. 60
Appendix B: General Care and Cleaning ................................................................................ 60
1. Safety Precautions
This product complies with the requirements of the following directives of the European Union for
CE conformity: 2014/30/EU (electromagnetic compatibility), 2014/35/EU (low voltage), 2011/65/EU
(RoHS). Overvoltage category II; pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of serious injury due to
short-circuits (arcing), the following safety precautions must be observed. Damages resulting from
failure to observe these safety precautions are exempt from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation measurement.
* Do not place the equipment on damp or wet surfaces.
* Do not exceed the maximum permissible input ratings (danger of serious injury and/or
destruction of the equipment).
* The meter is designed to withstand the stated max voltages. If it is not possible to exclude
without that impulses, transients, disturbance or for other reasons, these voltages are exceeded
a suitable presale (10:1) must be used.
* Disconnect test leads or probe from the measuring circuit before switching modes or functions.
* Check test leads and probes for faulty insulation or bare wires before connection to the
equipment.
* To avoid electric shock, do not operate this product in wet or damp conditions.
* Conduct measuring works only in dry clothing and rubber shoes, i. e. on isolating mats.
* Never touch the tips of the test leads or probe.
* Comply with the warning labels and other info on the equipment.
* The measurement instrument is not to be to operated unattended.
* Do not subject the equipment to direct sunlight or extreme temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic elds (motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
Termékspecifikációk
| Márka: | PeakTech |
| Kategória: | méret |
| Modell: | 1336 |
Szüksége van segítségre?
Ha segítségre van szüksége PeakTech 1336, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók méret PeakTech
25 Május 2024
19 Május 2024
19 Május 2024
18 Május 2024
17 Május 2024
17 Május 2024
14 Május 2024
13 Május 2024
12 Május 2024
12 Május 2024
Útmutatók méret
- méret Finder
- méret Murideo
- méret Eastron
- méret Aktobis
- méret Megasat
- méret Oregon Scientific
- méret BENNING
- méret Adwa
- méret Fluke
- méret Smartwares
- méret Hikmicro
- méret Janitza
- méret Uni-T
- méret Velleman
- méret Testboy
Legújabb útmutatók méret
22 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
21 Június 2024
19 Június 2024
19 Június 2024
18 Június 2024
14 Június 2024
12 Június 2024