Használati útmutató Pioneer SGY-PM68

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pioneer SGY-PM68 (20 oldal) a kerékpár számítógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/20
Quick Guide
New Installation Procedure
A new installation procedure is available for SGY-PM90 and
SGY-PM68 Series cranksets.
The newest firmware for the SGX-CA500 is required for use with
these cranksets 2.43
Compatible cranksets will have an orange sticker on the box and
another on one of the crank arms.
An updated owners manual will be included in those systems.
Units not displaying this orange sticker should follow the
installation instructions found in the owners manual provided with
that product.
The new installation procedure does not provide any
performance enhancements to the product.
Installation procedures on pages 3 and 4 of this Quick Guide are
for this new procedure.
Easy Installation Power Meter Cranksets
SGY-PM90 and SGY-PM68 with Non-Pioneer ANT+ Cycle Computer
1.) Magnet Placement
Measuring from the center of the bottom bracket out,
temporarily tape the magnet so that the center line of the
magnet is:
Right Drive Side - 42mm
Left Side - 53mm
Use the supplied Magnet Placement Template to help locate
the optimum locations for magnet placement on the frame.
Position the magnets so the sensor line and magnet center
line are parallel when the sensor passes over. Center hole on bottom bracket and use supplied
double sided tape to temporarily secure while locating
optimum magnet location
Sensor Line:
Magnet
Center
Line: Magnet Range
1.5mm 10.7mm
Magnet Template
card
2.) Confirm Magnet Placement
Remove and replace both Left and Right batteries. Orange light will appear for 10 seconds.
Rotate the crank slowly (30rpm). Check that the LED on each sensor lights green once for each
revolution.
Once confirmed, secure magnets for final placement. If no Green LED,
check and adjust
magnet placement
LED’s light green
3.) Pair to your ANT+ Computer
Spin the crank 3 4 rotations to activate the Power Meter
See your ANT+ Cycle Computer
Instructions for Power Meter Pairing and
Zero Calibration procedures.
ID 12345
Sensor ID
Left Sensor Arm
For additional Installation Instructions visit the following on-line support
locations
www.pioneerelectronics.com/PUSA/Cycle+Sports/Products/Power+Meters
www.Youtube/Pioneer Cycle Sports USA
Please refer to the owners manual for detailed installation instructions.
Visit https://cyclo-sphere.com/ for the latest firmware and updates.
Customer Support 1- - - 800 421 1624
E-Mail: cycle-sports@pioneer-usa.com

Termékspecifikációk

Márka: Pioneer
Kategória: kerékpár számítógép
Modell: SGY-PM68

Szüksége van segítségre?

Ha segítségre van szüksége Pioneer SGY-PM68, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók kerékpár számítógép Pioneer

Útmutatók kerékpár számítógép

Legújabb útmutatók kerékpár számítógép