Használati útmutató POSline SM2430

POSline Vonalkód olvasó SM2430

Olvassa el alább 📖 a magyar nyelvű használati útmutatót POSline SM2430 (25 oldal) a Vonalkód olvasó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/25

Manual del Usuario

SM2430

ESPECIFICACIONES SUJETAS A CAMBIO SIN PREVIO AVISO.

No warranty of any kind is made in regard to this material, including, but not limited to, implied

warranties of merchantability or fitness for a particular purpose. We are not liable for any errors con-

tained herein nor incidental or consequential dam furnishing, performance ages in connection with

or use of this material.

No part of this document may be reproduced, transmitted, stored in a retrieval system, tran-

scribed, or translated into any language or computer language in any form or by any means elec-

tronic, mechanical, magnetic, optical, chemical, manual or otherwise, without express written

consent and authorization.

We reserve the right to make changes in product design without reservation and without notifi-

cation. The material in this guide is for information only and is subject to change without notice.

All trademarks mentioned herein, registered or otherwise, are the properties of their various

respective owners.

Radio Notice

This equipment generates, uses and can radiate radio frequency energy. If not installed and

used in accordance with the instructions in this manual, it may cause interference to radio commu-

nications. The equipment has been tested and found to comply with the limits for a Class A comput-

ing device pursuant to EN55022 and 47 CFR, Part 2 and Part 15 of the FCC Rules. These

specifications are designed to provide reasonable protection against interference when operated in

a commercial environment.

Radio and Television Interference

Operation of this equipment in a residential area can cause interference to radio or television

reception. This can be determined by turning the equipment off and on. The user is encouraged to

try to correct the interference by one or more of the following measures:

* Reorient the receiving antenna.

* Relocate the device with respect to the receiver.

* Move the device away from the receiver.

* Plug the device into a different outlet so that the device and the receiver are on different

branch circuits.

If necessary the user may consult the manufacturer, an authorized dealer, or experienced

radio/television technician for additional suggestions. The user may find the following booklet pre-

pared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV

Interference Problems.” This booklet is available from the U.S. Government Printing Office, Wash-

ington, DC 20402 U.S.A., Stock No. 004000003454.

For CE-countries

This scanner is in conformity with CE standards. Please note that an approved, CE-marked

power supply unit should be used in order to maintain CE conformance.

Laser Safety

The Dual-Laser Omnidirectional Vertical Scanner complies with safety standard

IEC 60825 for a Class I laser product. It also complies with CDRH as applicable

to a Class IIa laser product. Avoid long term staring into direct laser light.

Radiant Energy: The Dual-Laser Omnidirectional Vertical Scanner uses two

low-power visible laser diodes operating at 650nm in an opto-mechanical scan-

ner resulting in less than 3.9µW radiated power as observed through a 7mm

aperture and averaged over 10 seconds.

Do not attempt to remove the protective housing of the scanner, as unscanned

laser light with a peak output up to 0.8mW would be accessible inside.

Laser Light Viewing: The scan window is the only aperture through which

laser light may be observed from this product. A failure of the scanner motor,

while the laser diode continues to emit a laser beam, may cause emission lev-

els to exceed those for safe operation. The scanner has safeguards to prevent

this occurrence. If, however, a stationary laser beam

is emitted, the failing scan -

ner should be disconnected from its power source immediately.

Adjustments: Do not attempt any adjustments or alteration of this product. Do

not remove the protective housing of the scanner. There are no user-service-

able parts inside.

Caution: Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous laser light exposure.

Optical: The use of optical instruments with this product will increase the eye

hazard. Optical instruments include binoculars, magnifying glasses, and micro-

scopes but do not include normal eye glasses worn by the user.

Termékspecifikációk

Márka:	POSline
Kategória:	Vonalkód olvasó
Modell:	SM2430

Szüksége van segítségre?

Ha segítségre van szüksége POSline SM2430, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Vonalkód olvasó POSline

POSline SL2030 Útmutató

11 Augusztus 2024

POSline SC2110 Útmutató

11 Augusztus 2024

POSline SL2020 Útmutató

11 Augusztus 2024

POSline SC2100b Útmutató

11 Augusztus 2024

POSline SM2410B Útmutató

11 Augusztus 2024

POSline SC2140 Útmutató

11 Augusztus 2024

POSline SM2450 Útmutató

11 Augusztus 2024

POSline TPC7020C Útmutató

11 Augusztus 2024

POSline SC2100 Útmutató

11 Augusztus 2024

POSline SM2410 Útmutató

11 Augusztus 2024

Útmutatók Vonalkód olvasó

Legújabb útmutatók Vonalkód olvasó

M3 Mobile Black Útmutató

2 Április 2025

M3 Mobile Smart Útmutató

2 Április 2025

Datalogic Magellan 1500i Útmutató

26 Március 2025

Zebra LS7808 Útmutató

15 Január 2025

Hamlet HBCS-2D360 Útmutató

15 Január 2025

Hamlet HBCS2D120U Útmutató

15 Január 2025

Hamlet HBCS-2DUWB Útmutató

15 Január 2025

Newland NFT10 Pilot Pro Útmutató

12 Január 2025

Newland HR2180 Útmutató

12 Január 2025

Datalogic Magellan 8302 Útmutató

12 Január 2025