Használati útmutató RIDGID PC-1250
RIDGID
nincs kategorizálva
PC-1250
Olvassa el alább 📖 a magyar nyelvű használati útmutatót RIDGID PC-1250 (1 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/1

Blade Installation
1. Place new blade into cutter so that the roller enters the
blade slot.
Figure 3
2. Reinstall “PC-1375” half of the handle.
3. Reinstall and tighten the three mounting screws.
4. Line up the lower handle hole and blade hole. Reinstall
the blade pin and the retaining ring.
Figure 4
PC-1375 Blade Change Instructions
Ridge Tool Co., Elyria, Ohio, U.S.A.
10/07
Printed in U.S.A. 010-338-222.10
Rev. A
PC-1375 Plastic Pipe and Tubing
Cutter Blade Change Instructions
WARNING
• Always wear safety goggles.
• Blade is sharp. Handle with care.
Blade Removal
1. Unlatch the handles so that they are fully open.
2. Remove retaining ring from the blade pin and remove
the blade pin
3. Lay the cutter on a flat surface with the “PC-1375” logo
facing up and remove the screws.
Figure 1
4. Remove the “PC-1375” half of the cutter handle.
5. Remove the blade.
Figure 2 – Blade Removal
Unlatch
Retaining Ring
and Pin
Screws
Install Blade
Over Roller
Unlatch
Retaining Ring
and Pin
Screws
Termékspecifikációk
Márka: | RIDGID |
Kategória: | nincs kategorizálva |
Modell: | PC-1250 |
Szüksége van segítségre?
Ha segítségre van szüksége RIDGID PC-1250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva RIDGID
12 Január 2025
12 Január 2025
12 Január 2025
15 Szeptember 2024
3 Szeptember 2024
29 Augusztus 2024
29 Augusztus 2024
29 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva DuroStar
- nincs kategorizálva Mr Steam
- nincs kategorizálva Hatco
- nincs kategorizálva Hitron
- nincs kategorizálva Swingline GBC
- nincs kategorizálva Bluebird
- nincs kategorizálva Yellow Garden Line
- nincs kategorizálva Approx
- nincs kategorizálva Brennenstuhl
- nincs kategorizálva Sumiko
- nincs kategorizálva Spacedec
- nincs kategorizálva KM-fit
- nincs kategorizálva Phonak
- nincs kategorizálva Simpson
- nincs kategorizálva AS Synthesizers
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025