Használati útmutató Sanyo VCC-HD2100P

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sanyo VCC-HD2100P (118 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/118
VCC-HD2300/HD2300P
VCC-HD2100/HD2100P
Features of This Camera
Specifications
Name and Function of Each Component
Connections
Lens Installation
Lens Adjustment
Viewing Firmware Version
Introduction1
/
17
The camera supports network operation. By simply connecting a LAN cable to it, you can construct the most
advanced network monitoring system. From the Web browser (Internet Explorer) installed on your PC, you
can operate the camera via the network in an easy-to-use manner.
In addition, it is a PoE product that can be powered through a LAN cable, so you can install it in locations
where there is no power outlet nearby.
The camera has 4-megapixel CMOS sensor that produces clear images at ultra-high resolution.
The camera can deliver full HD H.264 video throughout the network. Connecting a high-definition monitor to
your PC enables full high-definition video monitoring.
The camera supports both H.264 video and JPEG image compression formats, which you can choose from
depending on the network environment.
The camera offers the focus assist function that supports focus adjustment at megapixel image resolution,
allowing you to fine-tune the focus in optimal conditions in an easy manner.
The camera's motion sensor function can work in conjunction with any external alarm device, facilitating the
construction of a high-level security system.
Installing associated software applications on your PC further extends the capabilities of your surveillance system.
Introduction 2
/
17
Image pickup device 1/3" CMOS sensor
Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 2288 (H) × 1712 (V)
Lowest image
illumination
50IRE: 1.0 lx (at F1.2, color mode, high gain)
50IRE: 0.06 lx (at F1.2, black-and-white mode, high gain)
Video S/N ratio 50dB (when AGC is OFF)
Lens mount CS mount
Flange back adjustment 12.5±0.5 mm, electrical flange back adjustment (Focus assist function)
Day/Night function Auto, color, black-and-white, alarm input switching
( (VCC-HD2300P/VCC-HD2300 only))
White balance Auto (ATW), one push (AWC), manual (R/B gain adjustable), indoor, outdoor,
fluorescent
Backlight compensation Multi-spot evaluative metering, center-weighted average metering, masking
Electronic sensitivity
boosting
Auto (32× max) or Off
Electronic shutter VCC-HD2300P/VCC-HD2100P: 1/25, 1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000
VCC-HD2300/VCC-2100: 1/30, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000,
1/10000
Long exposure shutter (1×, 2×, 4×, 8×, 16×, 3)
Electronic iris ON/OFF (Set [SHUTTER] to “EI”.)
Iris control DC iris lens supported
Camera settings Selectable between 2 camera setting patterns
AGC gain Normal/Middle/High (Manual gain setting possible at Off)
Gamma correction 0.45, 1, Mode 1, Mode 2
Aperture compensation On/Off (Correction level adjustable)
VIVID COLOR EFFECT ON/OFF
DNR ON/OFF
Mirror H/V/HV/OFF
Privacy mask On/Off, max. 8 mask patterns
Motion sensor On (masking/detection area setting)/Off
Language selection English, French, German, Spanish, Japanese
Video output Composite output
LAN 10BASE-T/100BASE-TX (RJ-45 connector)
Alarm input 2 (NO/NC), also serve as Day/Night switching signal (VCC-HD2300P/VCC-HD2300
only)
Alarm output 2 (NO/NC, 16V, 150 mA, open collector)
Introduction 3
/
17

Termékspecifikációk

Márka: Sanyo
Kategória: Térfigyelő kamera
Modell: VCC-HD2100P

Szüksége van segítségre?

Ha segítségre van szüksége Sanyo VCC-HD2100P, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek