Használati útmutató Scanstrut Flip Pro Plus SC-USB-F4

Scanstrut nincs kategorizálva Flip Pro Plus SC-USB-F4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Scanstrut Flip Pro Plus SC-USB-F4 (9 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.8 csillagra

Letöltés PDF
Oldal 1/9
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO PLUS - FAST CHARGE USB-A & USB-C SOCKET (SC-USB-F4)
(not illustrated)
SC-USB-F4-001 Deutsch Connector
SC-USB-F4-002 Flying Lead
17-011-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Feed barrel through the gasket and
hole.
Use drilling template to drill ø32mm
(1 1/4”) hole.
FRONT INSTALL ONLY
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
FRONT INSTALL ONLY
Drill 2 pilot holes for front t bezel.
Ø32mm
(1.25”)
3mm (0.11”) Min
25mm (1”) Max
90°
TOP
1 2 3
4
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32”)
Hard Material e.g Fiberglass 3mm (1/8”)
Connect to 12/24V supply, ensuring a waterproof
connection. Fuse and select cable diameter according
to input voltage and current for your specic
installation.
TOP
6 5
FRONT INSTALL ONLY
Apply silicone seal on xings and pilot holes. Place the
front t bezel over charger and x bezel in place. Make
sure the bezel orientation is correct.
REAR INSTALL ONLY
Tighten lock ring onto product until
secure.
32mm (1 1/4”) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32”) or
3mm (1/8”) Pozi Screwdriver
Silicone
Tool list:
USB charger Gasket Lock ring
Front install only
Front t bezel
No.6x20mm
screws
Parts list:
x1 x1
x1
x2
x1
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
Technical information:
Input voltage
12/24V system
10-32V DC
Input current
max
6A
Output type
(12V system) (24V system)
USB-A USB-C USB-A USB-C
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A
MAX
5V⎓3A,
9V⎓3A,
12V⎓3A,
15V⎓3A,
20V⎓3A
MAX
Standby draw < 0.1W
Waterproof
rating
IPX4 front only lid closed
17-011-2023 (Issue 1)
FLIP PRO PLUS
-
FAST CHARGE USB-A
&
USB-C SOCKET (SC-USB-F4)
(not iustrate
 

Technical information:
I
Input voltage


Input current

max
 
   
Output type
  


  

  

M M M


Standby draw 
Waterproof

rating



 
�

Installation Instructions





 



Termékspecifikációk

Márka: Scanstrut
Kategória: nincs kategorizálva
Modell: Flip Pro Plus SC-USB-F4

Szüksége van segítségre?

Ha segítségre van szüksége Scanstrut Flip Pro Plus SC-USB-F4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Scanstrut

Scanstrut

Scanstrut SC-CW-12F Útmutató

3 Szeptember 2024
Scanstrut

Scanstrut Flip Pro Duo SC-MULTI-F2 Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut RLS-509-405 Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut ROKK Tablet Mounting Kit Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut DS6-P-BLK Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut DS30-S Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut ROKK Nest Qi Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut DS40-P Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut DS-H6 Útmutató

30 Augusztus 2024
Scanstrut

Scanstrut SC-CW-02E Útmutató

30 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025