Használati útmutató Siemens QAA75
Siemens
nincs kategorizálva
QAA75
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Siemens QAA75 (11 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/11

25/235
Siemens Schweiz AG Basic units RVS61.843 and RVS41.813 CE1U2355en_02
Landis & Staefa Division Mounting and installation 3. Juli 2008
3.7 Room unit QAA75…
Planning
min.
10 cm
2261Z03
The room unit should be located in the main living room while giving consideration to
the following criteria:
• The place of installation should be chosen so that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
• In the case of wall mounting, there must be sufficient clearance above the unit,
enabling it to be fitted and removed
When the unit is removed from its base, power is cut off so that the unit is out of
operation.
Terminal Designation QAA75.610 QAA75.611
1 CL+ BSB data BSB data
2 CL- BSB ground BSB ground
3 G+ Reserved Power supply DC 12 V
Mounting method
Connections
2359Z25
2359Z20
2359Z26
2359Z24
2359Z21

26/235
Siemens Switzerland Basic units RVS61.843 and RVS41.813 CE1U2355en_02
HVAC Products Contents 3. Juli 2008
Dimensions and drilling plan
42
185
2359Z12
100
82
2359Z50
4,2
9
56
60
100
80
11
39
67

36/235
Siemens Switzerland Basic units RVS61.843 and RVS41.813 CE1U2355en_02
HVAC Products Contents 3. Juli 2008
5 Handling
5.1 QAA75.. / QAA78.. / AVS37..
5.1.1 Operation
Operating elements
Room units
QAA75... / QAA78…
Operator unit
AVS37..
Selection of space heating
mode
Selection of DHW heatin
g
mode
Display of information
A
djustment of Comfort setpoint
Navigation and settings
Occupancy button
Quitting the setting
Adop
tion of setting
Selection of DHW heating
Selection of space
heatin
g
mode
Display of information
Quittin
g
the settin
g
A
djustment of Comfort setpoint
Navigation and settings
A
dopting the setting
Service socket
(
BSB
)
Cooling button
Cooling button
HP reset and
defrost button
Termékspecifikációk
Márka: | Siemens |
Kategória: | nincs kategorizálva |
Modell: | QAA75 |
Szüksége van segítségre?
Ha segítségre van szüksége Siemens QAA75, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Siemens
2 Január 2025
2 Január 2025
2 Január 2025
10 December 2024
2 Október 2024
30 Szeptember 2024
30 Szeptember 2024
24 Szeptember 2024
22 Szeptember 2024
22 Szeptember 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Bluesound
- nincs kategorizálva MIPRO
- nincs kategorizálva HealthPostures
- nincs kategorizálva Fitbit
- nincs kategorizálva POGS
- nincs kategorizálva Ultron
- nincs kategorizálva Neff
- nincs kategorizálva RéVive
- nincs kategorizálva Teka
- nincs kategorizálva HPRC
- nincs kategorizálva Command
- nincs kategorizálva Dragonshock
- nincs kategorizálva B-Speech
- nincs kategorizálva Metapace
- nincs kategorizálva LONQ
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025