Használati útmutató Smeg SPR30UGGX

Smeg sütő SPR30UGGX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Smeg SPR30UGGX (4 oldal) a sütő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
3
CLEANING STAINLESS STEEL
This brochure provides information and practical tips on how to clean
stainless steel surfaces, considering the three main types of soiling. The
appropriate cleaning method and materials are specified for each type. Clean
utensils immediately after use to preserve the original shine of the steel
surface.
HOW TO PREVENT CAUSING DAMAGE TO
STAINLESS STEEL SURFACES
Always clean the surface with never against the grain of the finish
when using creams and detergents. In the case of polished stainless
steel, never exert excessive pressure when cleaning.
Never use products containing the following:
1 Hydrochloric acid or its derivatives;
2 Sulphuric acid or its derivatives;
3 Hydrofluoric acid or its derivatives.
These substances (contained for example in anti-scale products or
bleach) have a corrosive effect.
Never use sharp or pointed metallic objects (e.g. knives, scissors,
screwdrivers) to remove grime or dirt from the surface.
Avoid using abrasive pastes, creams or pads on printed information on
the steel surface.
4
REGULAR GRIME
Example:
- Stains, fingerprints, dullness caused by daily use of the utensil.
WHAT TO USE
- For light stains: regular detergents used to clean windows, mirrors and polished
surfaces in general.
- For stubborn stains: special steel cleaning products.
METHOD
1 Spray the product directly on the stain, or apply it with a clean cotton rag or
kitchen paper.
2 Remove the product with dry kitchen paper, then wipe with a damp chamois.
5
OXIDISED GRIME
Example:
- Yellowing of the steel surface:
on kitchen steel burners;
bottom of oven.
Oxidation is a phenomenon common to all metals (such as aluminium, iron, gold and
silver) and is perfectly normal.
At fairly high working temperatures, the surface of the stainless steel used for the
manufacture of cooking appliances also oxidises, causing the phenomenon known
as "blueing". This normally occurs on specific components such as pan stands,
burner caps and all surfaces in direct contact with the heat.
This blueing is only superficial and does not affect the characteristics of the material
at lower levels; it can virtually be removed with the products available for this
purpose, to restore all the original cleanliness and shine.
WHAT TO USE
- For yellowing of the steel surface: non-abrasive liquids or pastes for steel or
metals.
- For cooking residues: regular detergents for light stains, or specific steel and
metal cleaning products for stubborn residues.
Only use abrasive pads to clean griddle and caps.
METHOD
1 Apply the cleaning product with a cloth or towel paper.
2 After a few seconds, rub the surface vigorously with towel paper until clean.
3 Remove all product residues with a clean cloth or towel paper.
4 Wipe over with a damp chamois to give shine to the surface.

Termékspecifikációk

Márka: Smeg
Kategória: sütő
Modell: SPR30UGGX

Szüksége van segítségre?

Ha segítségre van szüksége Smeg SPR30UGGX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók sütő Smeg

Smeg

Smeg c 9 gvx be Útmutató

9 Április 2025
Smeg

Smeg cs19ida 6 Útmutató

7 Április 2025
Smeg

Smeg ce6gpx Útmutató

6 Április 2025
Smeg

Smeg c 92 gmm nl Útmutató

6 Április 2025
Smeg

Smeg OTR24XU Útmutató

5 Április 2025
Smeg

Smeg B91GMMBNLK2 Útmutató

5 Április 2025
Smeg

Smeg BG91IAN9 Útmutató

30 Március 2025
Smeg

Smeg A3D-7 Útmutató

28 Március 2025
Smeg

Smeg cs 71 5 Útmutató

28 Március 2025
Smeg

Smeg snl 90 mfx 7 Útmutató

27 Március 2025

Útmutatók sütő

Legújabb útmutatók sütő