Használati útmutató Standard Horizon MLS-300

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Standard Horizon MLS-300 (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 19 ember találta hasznosnak.

/ 4 PDF

MLS-300

External Speaker

The MLS-300 External Loudspeaker is a high performance communications speaker matching the impedance and output require-

ments of most Standard Horizon transceivers.

INSTALLATION

1

)

MOUNTING BRACKET INSTALLATION

1.Remove the MLS-300from the bracket by removing the

two Mounting Bracket Knobs.

2.Choose a place to mount the MLS-300.

3.Use the bracket as a template to mark the locations of the

mounting holes.

4.Use a 5.2-mm (17/64”) bit to drill the holes, and secure

the bracket with the supplied screws, spring washers, flat

washers, and nuts (Figure 1 & 2).

5.Insert the MLS-300 into the bracket with the Mounting

Bracket Knobs which were removed in step 1.

6.Set the MLS-300 to the preferred angle, then tighten the

Mounting Bracket Knobs to fasten the MLS-300 to the

bracket.

7.Route and secure the speaker cable from the MLS-300 to

the Marine VHF. Connect the WHITE wire of the speaker

cable to the marine VHF’s positive (+) external speaker

output and the shield of the speaker cable to the negative

(–) external speaker connection.

5

φ

TEMPLATE for the MLS-300

Use this template to mark the location

where the round hole for the flush

mount is to be cut.

Figure 1 (Desktop Mount)

106 mm

95

φ

106 mm

Figure 2 (Wall Mount)

You may reverse

the position of the

bracket.

REPLACEMENT PARTS

Mounting Bracket (Black):RA0636400

Mounting Bracket (White):RA0636500

Mounting bracket Knobs (Black):RA045910A

Mounting bracket Knobs (White):RA043770A

Mounting bracket mounting hardware:U9900147

SPECIFICATIONS

Speaker Impedance:4 Ω

Maximum Power Input:10 W

Speaker Cable Length:6.5 feet (2 m)

Marine Division of VERTEX STANDARD

US Headquarters

10900 Walker Street, Cypress, CA 90630, U.S.A.

www.standardhorizon.com

EAE31X100

Termékspecifikációk