Használati útmutató Supermicro AOC-USASLP-L8I

Supermicro vezérlő AOC-USASLP-L8I

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Supermicro AOC-USASLP-L8I (104 oldal) a vezérlő kategóriában. Ezt az útmutatót 13 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/104

AOC-USASLP-L8i Add-on Card

User’s Manual

Revison 1.0

AOC-USASLP-L8i Add-on Card User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. (“Supermicro”) reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and documentation

may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or

machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0

Release Date: March 6, 2009

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document. Information in this document is subject to change without notice.

LSI, Integrated Mirroring, Integrated RAID, Integrated Striping, Fusion-MPT, and MegaRAID are

trademarks or registered trademarks of LSI Corporation. Other products and companies referred to herein

are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Table of Contents

Chapter 1 Safety Guidelines .......................................................... 1-1

1-1 ESD Safety Guidelines..................................................................... 1-1

1-2 General Safety Guidelines............................................................... 1-1

1-3 An Important Note to Users ............................................................. 1-1

Chapter 2 Connectors, Jumpers and Indicators............... 2-1

2-1 Front Connectors and Pin Definitions ............................................ 2-1

Internal SAS Connectors ........................................................................ 2-1

I-Button ................................................................................................... 2-1

2-2 Front Jumper Locations and Pin Definitions ................................. 2-2

2-3 RAID Minimum Drive Requirements .............................................. 2-3

Chapter 3 RAID Modes, Firmware and Drivers................... 3-1

3-1 RAID Modes....................................................................................... 3-1

3-2 Getting Firmware Downloads.......................................................... 3-2

3-3 Flashing Firmware............................................................................. 3-2

3-4 Downloading RAID Mode Drivers...................................................3-2

3-5 Activating RAID Modes in OPROM BIOS .....................................3-3

Chapter 4 MegaRAID BIOS Configuration Utility.............. 4-1

4-1 Performing a Quick Configuration .................................................. 4-1

4-2 Configuring Arrays and Logical Drives .......................................... 4-1

Starting the MegaRAID BIOS CU ...........................................................4-2

Using Easy Configuration ....................................................................... 4-2

Using New Configuration and View/Add Configuration...........................4-5

Creating a Global Hotspare Drive ...........................................................4-6

Initializing Virtual Drives..........................................................................4-7

First Initialization Method .....................................................................4-7

Second Initialization Method ................................................................4-8

4-3 Setting the Hard Disk Write Cache and Read Ahead Policies... 4-9

4-4 Rebuilding a Drive........................................................................... 4-10

4-5 Hot Plug Support.............................................................................4-11

4-6 Checking Data Consistency ..........................................................4-11

4-7 Viewing and Changing Device Properties...................................4-12

Viewing and Changing Adapter Properties ...........................................4-13

Termékspecifikációk

Márka:	Supermicro
Kategória:	vezérlő
Modell:	AOC-USASLP-L8I

Szüksége van segítségre?

Ha segítségre van szüksége Supermicro AOC-USASLP-L8I, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók vezérlő Supermicro

Supermicro AOC-SASLP-H8IR Útmutató

17 Augusztus 2024

Supermicro BMB-CMM-002 Útmutató

17 Augusztus 2024

Supermicro BTR-0012L-0000-LSI Útmutató

15 Augusztus 2024

Supermicro AOC-S3008L-L8I Útmutató

14 Augusztus 2024

Supermicro AOC-USASLP-L8I Útmutató

13 Augusztus 2024

Supermicro AOC-SASLP-MV8 Útmutató

12 Augusztus 2024

Supermicro AOC-USAS2-L8E Útmutató

12 Augusztus 2024

Supermicro AOC-SAS2LP-H8IR Útmutató

12 Augusztus 2024

Supermicro AOC-S3108L-H8IR Útmutató

12 Augusztus 2024

Supermicro AOM-S3108-H8 Útmutató

20 Május 2024

Útmutatók vezérlő

Legújabb útmutatók vezérlő

Sonance VC60R Útmutató

2 Április 2025

Trust Mylox GXT 735G Útmutató

30 Március 2025

Trust Mylox GXT 735 Útmutató

30 Március 2025

American DJ STAGE SETTER-8 Útmutató

30 Március 2025

American DJ DP-DMX20L Útmutató

30 Március 2025

Visual Productions TimeCore Útmutató

30 Március 2025

PCE Instruments PCE-RE22T Útmutató

28 Március 2025

Metronic Zap 3 495383 Útmutató

27 Március 2025

Turtle Beach Recon Útmutató

27 Március 2025

DJI Motion Controller Útmutató

14 Január 2025