Használati útmutató Swann NHD-817
Swann
Térfigyelő kamera
NHD-817
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Swann NHD-817 (12 oldal) a Térfigyelő kamera kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/12

Pan-Tilt-Zoom
Super HD Dome Camera
For use with Swann 7300 Series HD NVRs
EN INSTRUCTION MANUAL

2
Important instructions
1. Make sure your camera is fixed correctly and
stable if fastened in place.
2. Only use the supplied power adapter (48V).
3. Do not manually pan and tilt your camera when
it is turned on as it may damage the internal com-
ponents.
4. Never place strain of any kind on the network
cable connection. It’s designed to clip into place to
prevent slippage, but it won’t support any weight
and can be easily broken by a sharp tug.
5. The audio input requires a powered or amplified
microphone or audio source to work correctly.
6. The earth connection is optional. For added
safety from lightning strikes and or power surges,
screw this to a metal surface or object.
7. To perform a factory reset, disconnect the pow-
er input, hold down the reset button, reconnect
the power input and continue holding the button
for at least 20 seconds then release.
8. This camera can only be used with Swann’s
NVR-7300 Series HD Network Video Recorders.
9. Have a look at page 6 for instructions on how to
control your camera.
Please note: Have a look at the camera location
tips included with your NVR, to select the best lo-
cation for your camera.
Important note: All jurisdictions have specific
laws and regulations relating to the use of cam-
eras. Before using any camera for any purpose,
it is the buyer’s responsibility to be aware of all
applicable laws and regulations that prohibit or
limit the use of cameras.
Introduction

3
Connecting your Dome Camera
AUDI O
OUT
eS ATA
LANVGAHDMI
DC 48V USB
1 3 5 7
2 4 6 8
Power Input
Audio Input LAN
Reset
The earth connection is optional. For added safety
from lightning strikes and or power surges, screw
this to a metal surface or object.
NVR-7300
Ethernet cable connects
to the camera inputs on
the NVR and the power
input connects to the
power adapter.
Connect both of these
to the camera cable.
Connect the power cable
to a spare wall socket.
Earth
Ethernet & Power Cable
Connect this to the
power input on the
Ethernet cable.
Wall Mount
The camera cable is
attached to the dome
camera via one data
and one power cable
(as indicated by the
arrows). Gently dis-
connect both cables
when removing the
wall mount.
Dome Camera
Camera Cable
Power Adapter
Termékspecifikációk
Márka: | Swann |
Kategória: | Térfigyelő kamera |
Modell: | NHD-817 |
Szüksége van segítségre?
Ha segítségre van szüksége Swann NHD-817, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Térfigyelő kamera Swann
3 Október 2024
16 Szeptember 2024
15 Szeptember 2024
10 Szeptember 2024
10 Szeptember 2024
8 Szeptember 2024
2 Szeptember 2024
31 Augusztus 2024
27 Augusztus 2024
27 Augusztus 2024
Útmutatók Térfigyelő kamera
- Térfigyelő kamera Mach Power
- Térfigyelő kamera Ebode
- Térfigyelő kamera Night Owl
- Térfigyelő kamera IC Intracom
- Térfigyelő kamera Boss
- Térfigyelő kamera Flir
- Térfigyelő kamera Guardzilla
- Térfigyelő kamera Yale
- Térfigyelő kamera Toshiba
- Térfigyelő kamera Conceptronic
- Térfigyelő kamera Axis
- Térfigyelő kamera Exacq
- Térfigyelő kamera Smartwares
- Térfigyelő kamera Netgear
- Térfigyelő kamera Accsoon
Legújabb útmutatók Térfigyelő kamera
6 Április 2025
5 Április 2025
5 Április 2025
15 Január 2025
14 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025
13 Január 2025