Használati útmutató Tripp Lite B125-101-60-IRU

Tripp Lite AV hosszabbító B125-101-60-IRU

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite B125-101-60-IRU (8 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
1
Owner’s Manual
HDMI + IR over Dual
Cat5/6 Extender Kit
Model: B125-101-60-IRU
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
15-10-014-9334AF-EN.indd 1 11/5/2015 12:39:48 PM
2
Product Features
Package Includes
Optional Accessories
Transmitter and Receiver Units
IR-TX Cable and IR-RX Cable
USB Micro-B Cable – 3 ft.
Owner’s Manual
N202-Series Cat6 24 AWG Solid Wire Patch Cables
P568-Series High Speed HDMI Cables
UR05C-Series USB Micro-B Charge-Only Cables
U280-002-W12 2-Port USB Wall Charger
UAC-1B 1-Port USB Wall Charger
Extend a 1920 x 1080 (1080p @ 60Hz) signal up to 100 ft. using
Cat5/Cat6 cabling
IR control allows you to use your HDMI source’s remote control in the
same location as your extended monitor
Supports up to 7.1 channel surround sound, DTS-HD and Dolby
TrueHD audio
Supports EDID passthrough; HDCP and 3D compatible
Micro USB port supplies power to either the transmitter or receiver
units; no external power supplies required
Plug and play; no software or drivers required
15-10-014-9334AF-EN.indd 2 11/5/2015 12:39:48 PM
3
Installation
Refer to the installation diagram below as you perform these steps.
Notes:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6
cable must be used. The use of stranded wire Cat5e/6 cable or cable with a
gauge size higher than 24 AWG will result in shorter extension distance.
All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire cabling.
6
73
8*
5
4
CH1
CH2
TRANSMIT TER RECEIVER
Blu-ray™ PL AYER
1080p (60 Hz)
DISPL AY
1080p (60 Hz)
Up to 100 ft. Cat5e/6
2
1. Make sure all equipment being connected is powered off.
2. Connect the HDMI source to the HDMI input on the transmitter unit.
3. Connect the IR-TX cable to the IR port on the transmitter unit.
Note: Locate the IR-TX unit in an area with a clear line of sight to the source
(e.g. Blu-ray player).
4. Connect the CH1 RJ45 port on the transmitter to the CH1 RJ45 port
on the receiver using Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance at 1080p
(60Hz) video resolutions.
5. Connect the CH2 RJ45 port on the transmitter to the CH2 RJ45 port
on the receiver using Cat5e/6 cable.
Note: See the installation diagram for maximum extension distance at 1080p
(60Hz) video resolutions.
6. Connect the HDMI output on the receiver to the HDMI monitor.
* Power can be provided to either the transmitter or receiver unit. Choose which side you
prefer to receive power.
15-10-014-9334AF-EN.indd 3 11/5/2015 12:39:49 PM

Termékspecifikációk

Márka: Tripp Lite
Kategória: AV hosszabbító
Modell: B125-101-60-IRU

Szüksége van segítségre?

Ha segítségre van szüksége Tripp Lite B125-101-60-IRU, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók AV hosszabbító Tripp Lite

Útmutatók AV hosszabbító

Legújabb útmutatók AV hosszabbító