Használati útmutató Tripp Lite NPOE-EXT-1G30
Tripp Lite
nincs kategorizálva
NPOE-EXT-1G30
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tripp Lite NPOE-EXT-1G30 (32 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/32

Owner’s Manual
1-Port Gigabit
PoE/PoE+ Extender
Model: NPOE-EXT-1G30
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Español 9 • Français 17 • Русский 25
18-12-182-9338FC.indb 1 2/12/2019 9:25:02 AM

2
Package Includes
Product Features
• NPOE-EXT-1G30 Gigabit PoE+ Extender
• Owner’s Manual
• Save time and money by extending data and power over existing network
cables past the 100 m (328 ft.) limit
• Extend a 10/100/1000 Mbps application over longer distances by
cascading multiple extenders up to 500 m (1640 ft.)
• Supports all IEEE 802.3at- and IEEE 802.3af-compliant PoE+/PoE
devices (wireless LAN access points and bridges, VoIP, IP surveillance
cameras)
• Automatically detects and protects PoE/PoE+ equipment from being
damaged by incorrect installation (non-PoE devices only receive data)
• Plug and play—no additional power required
• Compact, wall mountable design
18-12-182-9338FC.indb 2 2/12/2019 9:25:02 AM

3
Single Extender Installation
1. Using a Cat5e/6 cable (up to 100 m / 328 ft. long), connect your
powered source device (such as a PoE switch) to the “IN” port on the
unit.
2. Using another Cat5e/6 cable (up to 100 m / 328 ft. long), connect
your remote PoE powered device (PD) (such as VoIP or IP surveillance
camera) to the “OUT” port on the unit. The LEDs will illuminate green for
power and orange for signal.
Note: Your PoE source must meet or exceed IEEE 802.3at / 802.3af standards.
Please see table for more information.Maximum Supported Power
Single Extender Installation Diagram
Single Extender Installation with Midspan Diagram
CameraPoE tende Ex r
PoE
Switch
Max (32 100 m 8 ft.) Max 100 m (328 ft.)
CameraPoE tende Ex r
Switch
(Non-PoE)
Mids npa
Max (32 100 m 8 ft.) Max 100 m (328 ft.)
Note: Where external power is required, the power source (e.g.. midspan or PoE
injector) must be installed between the Ethernet switch (non-PoE source) and the first
NPOE-EXT-1G30WP extender.
18-12-182-9338FC.indb 3 2/12/2019 9:25:02 AM
Termékspecifikációk
Márka: | Tripp Lite |
Kategória: | nincs kategorizálva |
Modell: | NPOE-EXT-1G30 |
Szüksége van segítségre?
Ha segítségre van szüksége Tripp Lite NPOE-EXT-1G30, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Tripp Lite
1 Április 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
15 Január 2025
14 Január 2025
9 Január 2025
9 Január 2025
9 Január 2025
Útmutatók nincs kategorizálva
- nincs kategorizálva Playtive Junior
- nincs kategorizálva ASA
- nincs kategorizálva Flame
- nincs kategorizálva Jabra
- nincs kategorizálva Hähnel
- nincs kategorizálva IK Multimedia
- nincs kategorizálva Outwell
- nincs kategorizálva MEPROLIGHT
- nincs kategorizálva Seaward
- nincs kategorizálva Bora
- nincs kategorizálva V-Zug
- nincs kategorizálva Heckler
- nincs kategorizálva Ultimate Speed
- nincs kategorizálva Tannoy
- nincs kategorizálva Kemo
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025