Használati útmutató Trust 71169 - ZCTS-808 Zigbee Wireless Contact Sensor

Trust Biztonság 71169 - ZCTS-808 Zigbee Wireless Contact Sensor

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Trust 71169 - ZCTS-808 Zigbee Wireless Contact Sensor (27 oldal) a Biztonság kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/27
This room doesn’t contain any devices
Press + to add a device
+
X
+
B
A
COMPATIBILITY
The contact sensor works with the Z1 ZigBee Bridge and the ICS-2000.
1. (RE)PLACE THE BATTERY
A Remove the backplate from the contact sensor.
B Open de battery cover using a flat screwdriver.
C Place the included CR2032 battery in the contact sensor. Note the positive
and negative polarity in the compartment. Close the battery cover.
2. INDICATORS
The contact sensor contains a LED indicator (This is not a button) to show the
status of the contact sensor. Please see below the meaning of the dierent
LED indications.
LED FUNCTION TABLE
Connection mode LED will flash once per second
for approximately 1 min.
Connected successfully LED will stop flashing
Sensor reset LED will flash fast
Sensor triggered (When the sensor is
opened for more then 10 mm) LED will flash once
A
B
C
A
A
B

Termékspecifikációk

Márka: Trust
Kategória: Biztonság
Modell: 71169 - ZCTS-808 Zigbee Wireless Contact Sensor

Szüksége van segítségre?

Ha segítségre van szüksége Trust 71169 - ZCTS-808 Zigbee Wireless Contact Sensor, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek