Használati útmutató Tycon Systems TP-SCPOE-2424-HP
Tycon Systems
Akkumulátor töltő
TP-SCPOE-2424-HP
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Tycon Systems TP-SCPOE-2424-HP (6 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/6

TYCON POWER SYSTEMS
TYCON
TP-SCPOE-24xx-HP Series
Solar & PoE Battery Charger
USER’S MANUAL

User’s Manual
TP-SCPOE-24XX-HP Series
Features:
Battery Polarity Reverse Protection
Battery Over Charge Protection
Battery Over Discharge Protection
Solar Panel Polarity Reverse Protection
Solar Panel Over Charge Protection
Output Short Circuit Protection
Output Over Voltage Protection
POE Output Short Circuit Protection
POE Output Support 802.3af Function (TP-SCPOE-2448D-HP)
Two Input method:
(1)Solar Panel (2)PoE Power Source (Always Solar First.)
Up to Three Outputs:
DIN Rail Mountable

User’s Manual
TP-SCPOE-24XX-HP Series
Panel Description:
Item Name Descriptions
1 POE : PoE power input indicator: the LED lights when the PoE input jack
(the lower jack) has 36V~57V input.
2 SOL : Solar power input indicator: the LED lights when SOL terminal is
connecting to a solar panel.
3 CHA : Charging indicator: the LED lights when BAT terminal is connected
to battery and charging, the charger power may from solar or PoE.
4 LOA : Loading indicator: the LED lights when the rear panel output
terminal is connecting to a device and offering power.
The LED always on when power ready.
5 REV : Battery polarity reverse indicator: the LED lights when the battery
polarities are reversed. (detail description see Sec. 5.1)
6 IN : PoE Input Jack: the lower RJ45 jack, used for PoE input. Allowed
input voltage 36~57V
7 OUT : PoE Output Jack: the upper RJ45 jack, used for PoE output; Output
voltage depends on what model you selected.
8 Fuse
Fuse: for output over current protection, limiting the battery output
current <= 10A. (If solar panel or PoE source is installed before the
battery, and if the polarities of battery are reversed, then the fuse will
be burnt.)
9 SOL : Solar Panel Terminal: used to connect the solar panel.
10 BAT : Battery terminal: used to connect the battery.
NOTE: ALWAYS CONNECT THIS TERMINAL FIRST AND
DISCONNECT LAST.
11 LOA : Load Terminal: The output voltage is the same as battery voltage.
Maximum voltage clamped at 24.5V.
Termékspecifikációk
Márka: | Tycon Systems |
Kategória: | Akkumulátor töltő |
Modell: | TP-SCPOE-2424-HP |
Szüksége van segítségre?
Ha segítségre van szüksége Tycon Systems TP-SCPOE-2424-HP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Akkumulátor töltő Tycon Systems
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
Útmutatók Akkumulátor töltő
- Akkumulátor töltő Bracketron
- Akkumulátor töltő TP-Link
- Akkumulátor töltő Livoo
- Akkumulátor töltő MSW
- Akkumulátor töltő DieHard
- Akkumulátor töltő CRUX
- Akkumulátor töltő Outspot
- Akkumulátor töltő Voltcraft
- Akkumulátor töltő ISDT
- Akkumulátor töltő Toshiba
- Akkumulátor töltő Valore
- Akkumulátor töltő Vorago
- Akkumulátor töltő Growatt
- Akkumulátor töltő Fujifilm
- Akkumulátor töltő IDX
Legújabb útmutatók Akkumulátor töltő
9 Április 2025
9 Április 2025
9 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
31 Március 2025
30 Március 2025
26 Március 2025