Használati útmutató Victron Energy VE.Bus Smart Dongle

Victron Energy nincs kategorizálva VE.Bus Smart Dongle

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Victron Energy VE.Bus Smart Dongle (13 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/13
VE.Bus Smart Dongle
Rev 02 - 11/2022
This manual is also available in .HTML5
ENGLISH
Table of Contents
1. Introduction ....... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... 1
2. Installation ... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .. 2
2.1. What's in the box . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ... 2
2.2. Installation without external battery sensor . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .. 2
2.3. Installation with an external battery sensor . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .. 3
2.4. Updating firmware .. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... . 4
2.5. VE.Smart Networking .. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... . 5
3. Operation . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . ... . . 6
3.1. LED Status codes .. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... . 6
3.2. Inverter/charger control and monitoring . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .. 6
3.3. Usage as a battery sensor .. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ... 7
3.4. Usage with a GX device . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ... 7
4. Specifications . .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... 9
5. Troubleshooting 10.. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..
6. Appendix 11.. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ...
6.1. Dimensions 11.. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ...
6.2. Firmware overview 11.. .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..
VE.Bus Smart Dongle
1. Introduction
The VE.Bus Smart dongle is a Bluetooth accessory for and * with a VE.Bus port.inverter/chargers inverters
The dongle has the following features and functionalities:
The dongle can remotely control the inverter/charger via Bluetooth and the VictronConnect app. The inverter/charger can be
switched to on, off or charger-only and the AC input current limit can be adjusted.
The dongle can remotely monitor the inverter/charger via Bluetooth and the VictronConnect app. The AC and DC parameters,
device status, warnings or alarms can be monitored.
The dongle can be connected to a single inverter/charger or multiple inverter/chargers set up in parallel and/or 3-phase.
The dongle measures the battery temperature and voltage.
The dongle can act as a battery temperature and voltage sensor for an inverter/charger and/or for .VE.Smart Networking
The dongle can be connected to an external temperature sensor, rather than using its own (default) temperature sensor.
Note that the dongle cannot be used to configure an inverter/charger. Read the VictronConnect VE.Bus
manual for more specific information on configuring an inverter/charger.
*) In the remainder of this document, we will refer to inverter/chargers instead of both inverter/chargers and inverters. If the dongle
is used with an inverter, the charger-related features will not be available, such as monitoring AC parameters, switching a unit to
"charger only" mode or adjusting the AC input current limit.
VE.Bus Smart Dongle
Page 1 Introduction

Termékspecifikációk

Márka: Victron Energy
Kategória: nincs kategorizálva
Modell: VE.Bus Smart Dongle

Szüksége van segítségre?

Ha segítségre van szüksége Victron Energy VE.Bus Smart Dongle, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Victron Energy

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025