Használati útmutató Williams Sound CHG 520

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Williams Sound CHG 520 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 8.5 felhasználó értékelte átlagosan 4.3 csillagra

Oldal 1/2
CHG 520
5-Unit Drop-In Battery Charger
USER MANUAL
CHG 520 Front and Rear View
Setup Instructions
1. Plug the DC power connector into the rear of the CHG 520.
2. Plug the power supply into an AC wall outlet.
3. Insert the Receiver into the charging slot. The receivers must be facing forward to make contact
with the charging contacts. The LED indicator on top of the IR RX20 receiver will illuminate red
4. It is safe to leave the receivers in the charger even after the batteries are fully charged. However,
we do not recommend leaving receivers in the charger for a prolonged period of time.
5. A piggy-back cable is available, which can be used to connect up to three CHG 520 chargers to
one power supply.
If No LED’s Light Up:
1. Verify that the power supply is plugged into a wall outlet.
2. Verify the wall outlet has power (no tripped circuit breaker, etc).
3. Verify the receiver is turned off.
4. Verify that all receivers are facing front in the charger. If charging, the indicator LED will illuminate
red. If fully charged, it should illuminate green.
Recycling Instructions
Help Williams AV protect the environment! Please take the time to dispose of your equipment
properly.
Please Recycle
Please do NOT dispose of your equipment in the household trash. Please take the equipment to
a electronics recycling center for proper disposal.
1

Termékspecifikációk

Márka: Williams Sound
Kategória: nincs kategorizálva
Modell: CHG 520

Szüksége van segítségre?

Ha segítségre van szüksége Williams Sound CHG 520, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek