Használati útmutató 3M X90
Olvassa el alább 📖 a magyar nyelvű használati útmutatót 3M X90 (39 oldal) a Beamer kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/39
1
This manual is only intended to explain Network Functions.
For safety, operations or any other issues, refer to the all user's manual for this
projector.
• Before using the network functions, read the all user's manual
for this projector carefully to ensure your projector is set up correctly.
• After reading, keep the manuals in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Contents
Network Functions .................................................................. 2
Settings ................................................................................... 6
Projector Control ................................................................... 22
Failure & Warning Alerts via E-mail ...................................... 26
Projector Management via SNMP .......................................... 28
Controlling the Projector via Scheduling .............................. 29
e-SHOT(Still Image Transfer) Display ................................... 32
Command Control via the Network ....................................... 34
Trademark acknowledgment
• Windows is a registered trademark of Microsoft Corporation.
• Netscape is a registered trademark of Netscape Communications Corporation.
• JavaScript is a registered trademark of Sun Microsystems, Inc.
All other trademarks are the properties of their respective owners.
X90w
Multimedia Projector
Network Functions
© 3M 2007. All Rights Reserved.
2
Network Functions
Network Functions
Conguring and Controlling the Projector via a Web Browser
You can change the settings of or control the projector via a network by using a
web browser from a PC that is connected to the same network.
( )4
Failure & Warning Alerts via E-mail
The projector can automatically send an alert to specied e-mail addresses when
the projector requires maintenance or has encountered an error.
( )26
Projector Management via SNMP
This projector is SNMP (Simple Network Management Protocol) compliant,
allowing you to monitor it from a remote location using SNMP software. In
addition, the projector is able to send failure & warning alerts to a specied PC.
( )28
Controlling the Projector via Scheduling
You can schedule the projector to perform various functions according to the
DATE and TIME.
( )29
Still Image Transfer
The projector can display still images that are transferred via the network.
( )32
Projector Control via RS-232C via the Network
The projector can be controlled using RS-232C commands over a network.
( )34
This projector is equipped with the following network functions.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.
3
Network Functions
Before using the network functions…
To use the network functions of this projector, the projector must be congured to
suit your network. Consult with your network administrator before connecting the
projector to your network. Incorrect network conguration of this projector may
cause problems on your network.
Connect to the Gateway (The router/PC that forwards trafc to a destination
outside of the subnet of the transmitting device) from the network terminal on the
projector using a CAT-5 (or greater) cable and congure the following settings.
If using a network with DHCP enabled:
The projector’s network settings can be congured automatically. when [DHCP] on
the network menu is set to [TURN ON]. Please refer to DHCP in network menu. (
Operator's Guide : NETWORK Menu) If a xed / static IP address is required, please
congure your projector according to the steps in the following section.
If using a network system that does not have DHCP enabled or if
using a xed IP address on a network system equipped with DHCP
enabled:
Congure the following settings on the network menu.
( ) Operator's Guide : NETWORK Menu
1. [DHCP] [DHCP] [TURN OFF]: Disable DHCP (Set to ).
2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect
to your network.
3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to
connect to your network.
4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that
forwards trafc to a destination outside of the subnet of the transmitting
device) address for the projector to connect to your network.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.
Termékspecifikációk
| Márka: | 3M |
| Kategória: | Beamer |
| Modell: | X90 |
Szüksége van segítségre?
Ha segítségre van szüksége 3M X90, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Beamer 3M
11 Október 2024
4 Október 2024
19 Szeptember 2024
7 Szeptember 2024
2 Szeptember 2024
27 Augusztus 2024
26 Augusztus 2024
16 Augusztus 2024
11 Augusztus 2024
5 Augusztus 2024
Útmutatók Beamer
- Beamer Dell
- Beamer BenQ
- Beamer Adj
- Beamer Mitsubishi
- Beamer JVC
- Beamer EasyMaxx
- Beamer Hama
- Beamer Microtek
- Beamer Fun Generation
- Beamer Casio
- Beamer Panasonic
- Beamer Pyle
- Beamer Naxa
- Beamer Renkforce
- Beamer Hitachi
Legújabb útmutatók Beamer
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
2 Április 2025
15 Január 2025
14 Január 2025
13 Január 2025
12 Január 2025