Használati útmutató 4ms Stereo Triggered Sampler

4ms nincs kategorizálva Stereo Triggered Sampler

Olvassa el alább 📖 a magyar nyelvű használati útmutatót 4ms Stereo Triggered Sampler (24 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 10.5 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/24
Stereo Triggered Sampler
4ms Company
User Manual 1.0 – August 16, 2017
for f irmware v1.0
The Stereo Triggered Sampler is a high fidelity, two-channel stereo audio recorder and playback module. The
STS can record high quality stereo WAV files while simultaneously playing two different stereo files. A maximum of
600 samples can be loaded at one time from the removable/swappable microSD card, in a variety of formats up to
96kHz/32-bit/stereo WAV. All sample parameters (1V/oct pitch, sample file selection, length, and start position) are
CV controllable, and trigger jacks for play, record, and reverse allow for synchronization. On-board editing tools
allow you to set loop/trim points and gain, as well as assigning samples to banks and slots.
Two independent stereo playback channels can play any of 600 samples simultaneously
Recording channel creates stereo WAV files directly onto microSD Card for immediate use
Extremely low noise, high fidelity design
Plays a variety of WAV files up to 32-bit/96kHz
Intelligent file system makes loading large sample libraries easy by organizing banks into folders
CV and controls for 1V/oct tracking, Start Position, Length, Sample selection, Reverse and Play
Trim samples and set Loop points, adjust gain, and re-organize banks and sample slots on the fly.
Includes microSD card with Sample Pack, SD adaptor, 10-to-16 pin power cable and M3 screws

Termékspecifikációk

Márka: 4ms
Kategória: nincs kategorizálva
Modell: Stereo Triggered Sampler

Szüksége van segítségre?

Ha segítségre van szüksége 4ms Stereo Triggered Sampler, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek