Használati útmutató Acer ED323QUP
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer ED323QUP (21 oldal) a Monitor kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 4.4 csillagra
Oldal 1/21
LCD Monitor Quick Setup Guide
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
• To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your
location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
• NEVERSPRAYORPOURANYLIQUIDDIRECTLYONTOTHESCREENORCASE.
• DONOTUSEANYAMMONIAORALCOHOL-BASEDCLEANERSONTHELCDDISPLAYSCREENORCASE.
• Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
• Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
• Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
• Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
• Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may
result in permanent damage.
• Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD monitor Power cord HDMI cable
(Optional)
DP cable
(Optional) Quick start guide Adapter
LC D M o n it o r N IT R O ED Series / ED323QU
USER GUIDE
Attaching/Removing the base
1. Remove the monitor from the package.
2. Place the monitor face down on a flat and stable surface covered by a protective sheet and then install the four screws to secure
the stand to the monitor.
3. Fasten the captive screw on the base to secure the base to the stand.
4. Reverse the steps when you want to remove the base.
Connecting your monitor to a computer
1. Connect the monitor to your computer using an HDMI or DP cable.
2. Connect the power adapter to the DC-in port on the monitor.
3. Connect the power cord to the power adapter.
4. Fully insert the power cord plug into the power outlet socket.
Using the joystick
Turning on/off the monitor:
• When the monitor is off, press the joystick to turn on the monitor. When the monitor is turned on, press and
hold the joystick for about 5 seconds to turn off the monitor.
Configuring the monitor:
• Press the joystick to open the OSD menu.
• Toggle the joystick up/down/left/right to navigate the OSD menu.
• Press the joystick to confirm selections.
• Toggle the joystick left/right to adjust settings.
• Press the joystick to confirm changes.
HDMI1DP1 HDMI2 DP2HDMIDP
HDMI1 / HDMI2
DP1 / DP2
Termékspecifikációk
| Márka: | Acer |
| Kategória: | Monitor |
| Modell: | ED323QUP |
Szüksége van segítségre?
Ha segítségre van szüksége Acer ED323QUP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Monitor Acer
9 Április 2025
16 Január 2025
16 Január 2025
13 Január 2025
13 Január 2025
31 December 2025
31 December 2025
7 December 2024
7 December 2024
5 December 2024
Útmutatók Monitor
- AMX
- Avocor
- DTEN
- Epson
- Shure
- Lilliput
- Akuvox
- Approx
- TV One
- Ernitec
- Night Owl
- Prestigio
- Prowise
- SmallHD
- MSI
Legújabb útmutatók Monitor
9 Április 2025
9 Április 2025
8 Április 2025
8 Április 2025
5 Április 2025
5 Április 2025
4 Április 2025
2 Április 2025
2 Április 2025
30 Március 2025