Használati útmutató Acer EH273A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer EH273A (2 oldal) a Monitor kategóriában. Ezt az útmutatót 28 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 5.0 csillagra

AcerLCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the adapter available in your

location.

• Turn off the LCD monitor and unplug the adapter.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

•NNEEVVEERR SSPPRRAAYY OORR PPOOUURR AANNYY LLIIQQUUIIDD DDIIRREECCTTLLYY OONNTTOO TTHHEE SSCCRREEEENN OORR CCAASSEE..

• PPLLEEAASSEE DDOO NNOOTT UUSSEE AANNYY AAMMMMOONNIIAA OORR AALLCCOOHHOOLL--BBAASSEEDD CCLLEEAANNEERRSS OONN TTHHEE LLCCDD DDIISSPPLLAAYY SSCCRREEEENN OORR CCAASSEE..

• Acerwill not be liable for damage resulting from use of any ammonia or alcoholbased cleaners.-

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any

nature.

5. Store the LCD monitor in a room with a temperature of -20 60° C (-4° to140° F). Storing the LCD monitor outside this ran° toge

may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor- -toPC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

A

Package contents

ttaching the monitor to the base

1.

2.

3.

Connecting Your Monitor to a Computer

External Controls

LCD monitorQuick start guideVGA cableHDMI cable

(Optional)(Optional)

1. Turn off your monitor and unplug your computer’s power cord.

2. 2-1 Connect HDMI Cable (Only HDMI-input model)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the HDMI cable to the computer.

2-2 Connect VGA Cable (Only VGA-input model)

a.Make sure both the monitor and computer are powered-OFF.

b.Connect the VGA cable to the computer.

3. Connect the Audio Cable. (Only Audio-out Model) (Optional)

4. Insert the monitor power cable into the power port at the back of the monitor.

5. Plug the power cords of your computer and your monitor into a nearby electrical outlet.

AC Power cordAC Adapter

Remove the monitorand base from the packaging.

Remove the two coin screws at the bottom of the stand.

Adjust the angle of the base, clip it into the stand, and tighten the two coin screws on the bottom of the base.

a. Press to view Main page. Press again to enter mode select

function.

b. When the Function Menu is active. Press to return previous

Menu or exit current Menu.

a. Press to view Main page. Press again to enter brightness

adjustment function.

b. When the Function Menu is active, this button will enter a

selection in the OSD.

a. Press to view Main page. Press again to enter Input select

function.

b. When the Function Menu is active, press this button selected

or move to the previous function.

a. Press to view Main page. Press again to enter next function

in the Function Menu.

b. When the Function Menu is active, press this key selected or

move to the next function.

Turns the monitor on/off.

Blue indicates power on. Orange indicates standby/power

saving mode.

No. IconItemDescription

1Mode/Exit

2Brightness/

Enter

Input/-3

4 Menu/+

5POWERPower button

/

/

/

/

LCD MonitorEH 3 series-EH273

HDMI DC-19V

D-Sub

(VGA)

Audio Out

12 3 45

Termékspecifikációk