Használati útmutató Acer EI491CURS

Acer Monitor EI491CURS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer EI491CURS (10 oldal) a Monitor kategóriában. Ezt az útmutatót 14 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/10
LCD Monitor Quick Start Guide - 1
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically
rated to operate with the AC power available in your location.
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen
gently.
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED
CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
Acer will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.
2. Do not place the LCD monitor near a window. Exposing the monitor to
rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause
permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An
authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to
140°F). Storing the LCD monitor outside this range may result in
permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any
of the following circumstances occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
LCD Monitor Quick Start Guide - 2
English
Package contents
LCD Monitor AC Power Cord DP Cable (Optional)
HDMI Cable (Optional) Remote Controller Quick Start Guide
VESA Mount Screws
(1) M4*35 mm Hex standoffs
(2) M4*17 mm Hex standoffs
HDMI
HDMI
LCD Monitor EI seri es EI R
LCD Monitor Quick Start Guide - 3
English
Attaching the monitor to the base
1. Unpack the box. 2. Take the Styrofoam with display out of
the box.
3. Remove the top Styrofoam. 4. Tighten the base and stand arm with
three screws.
5. Attach the base of step 4 to the quick
release notch of the LCD monitor
securely.
6. When detaching the base, remove
the semicircular cover first, then
press down the quick release button
as illustrated.
7. Flip the LCD monitor over to make it
stand upright on the desk where it will
be used. (Note: Do NOT press the
screen to avoid damage any time.)
8. Place cables through the hole on
stand for easy cable management.

Termékspecifikációk

Márka: Acer
Kategória: Monitor
Modell: EI491CURS

Szüksége van segítségre?

Ha segítségre van szüksége Acer EI491CURS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Acer

Acer

Acer EV227Q Útmutató

9 Április 2025
Acer

Acer VG281K Útmutató

16 Január 2025
Acer

Acer V223W Útmutató

16 Január 2025
Acer

Acer V193L Útmutató

13 Január 2025
Acer

Acer SB270 Útmutató

13 Január 2025
Acer

Acer AL2021 Útmutató

31 December 2025
Acer

Acer VVA241Y Útmutató

31 December 2025
Acer

Acer ED320QRP3 Útmutató

7 December 2024
Acer

Acer K252HQL Útmutató

5 December 2024

Útmutatók Monitor

Legújabb útmutatók Monitor