Használati útmutató Acer XF240H
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Acer XF240H (6 oldal) a Monitor kategóriában. Ezt az útmutatót 19 ember találta hasznosnak és 10 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/6
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD
monitor
Power
cord
Audio
cable
(optional)
DVI-DL
cable
(optional)
HDMI
cable
(optional)
DP cable
(optional)
MHL
cable
(optional)
Quick start
guide
MHL
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DVI-D (optional) and /or DP
(optional) and/or HDMI (optional) and/or MHL (optional) input
socket of the monitor, and the DVI-D (optional) and/or DP
(optional) and/or HDMI (optional)and/or MHL (optional) output
socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
2
FreeSync (DP only):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
Termékspecifikációk
| Márka: | Acer |
| Kategória: | Monitor |
| Modell: | XF240H |
Szüksége van segítségre?
Ha segítségre van szüksége Acer XF240H, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Monitor Acer
9 Április 2025
16 Január 2025
16 Január 2025
13 Január 2025
13 Január 2025
31 December 2025
31 December 2025
7 December 2024
7 December 2024
5 December 2024
Útmutatók Monitor
- Ernitec
- InFocus
- X-Rite
- Ganz
- Dynaudio
- ONYX
- Denver
- Mitsubishi
- AMX
- ARRI
- Syscom
- UPERFECT
- Yamaha
- Joy-It
- Konig
Legújabb útmutatók Monitor
9 Április 2025
9 Április 2025
8 Április 2025
8 Április 2025
5 Április 2025
5 Április 2025
4 Április 2025
2 Április 2025
2 Április 2025
30 Március 2025