Használati útmutató ACTi PMAX-1105

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ACTi PMAX-1105 (25 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.4 csillagra

Oldal 1/25
Indoor Zoom Box
Mounting the Wall on
using an Indoor Bracket
Installation Guide
For Models:
B2x, I2x
2014/11/11
www.acti.com
Installation Guide
2
Table of Contents
Before Installation 3...................................................
Connecting a Power Adapter (Optional) .................................................. 3
Connecting the DI/DO and Audio Devices (Optional) ............................. 5
How to Connect DI/DO Devices .............................................................. 5
How to Connect Audio Devices ............................................................... 8
Connecting a Serial Device (Optional) ..................................................... 9
Indoor Installation Procedures ............................ 11
Step 1: Mount the Indoor Bracket ........................................................... 11
Step 2: Attach the Camera to the Bracket ............................................. 12
Step 3: Connect the Cable(s) .................................................................. 14
Step 4: Access the Camera Live View .................................................... 15
Other Accessories ................................................ 16
How to Install / Remove the Memory Card ............................................ 16
How to Insert the Memory Card ............................................................ 16
How to Remove the Memory Card ........................................................ 16
Accessing the Camera ......................................... 17
Congure the IP Addresses .................................................................... 17
Access the Camera .................................................................................. 21
Safety Information ................................................ 23
www.acti.com
Installation Guide
3
Before Installation
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO), Audio
Input and Output devices, as well as Serial Devices like a Pan-Tilt (PT) Scanner using the
bundled terminal blocks. The use of these devices, however, is optional.
Connecting a Power Adapter (Optional)
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power adapter
must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the and pins of the power terminal block. 12V GND
2. Take note that a standard power adapter cable has two (2) dierent wires:
White stripe: Connects 12V Pin to
Connects to GND Pin

Termékspecifikációk

Márka: ACTi
Kategória: nincs kategorizálva
Modell: PMAX-1105

Szüksége van segítségre?

Ha segítségre van szüksége ACTi PMAX-1105, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek