Használati útmutató Alpine KIT-8VWX

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alpine KIT-8VWX (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 3.5 felhasználó értékelte átlagosan 4.9 csillagra

Oldal 1/2
Compatible with these Alpine navigation devices
INE-W928R
VW Eos
VW Golf V / VI
VW Jetta V / VI
VW Passat / Passat CC
VW Polo 6R
VW Scirocco
Installation Manual
INE-W928R Kit
part-no.:
KIT-8VW
KIT-8VWD
colour: black
5
6
6
5
• (1) facia plate
• (2) mounting bracket right
• (3) mounting bracket left
• (4) hexagonal bar (AF43,6) / (AF37,2)
• (5) slider
• (6) countersunk at head tapping screw
5. : Rasp hexagonalIf necessary
pocket to AF44 in order to use
hexagonal bar AF43,6
6. Connect all required circuit points
Push Alpine INE-W928R into dash
board.
Golf VI only: Fix screws on top
8. Place OEM panel over facia plate
to nish installation.
7. Place facia plate
Put dome of facia plate
exactly over the holes of
mounting frames
(see arrow)
Fix facia plate with 4 screws
a
a
5.
VW Golf V
VW Golf VI
VW Jetta V
VW Jetta VI
VW Passat
VW Polo 6R
VW Eos
VW Scirocco
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
x sliders (a) with glue
Hexagonal Bar
standard unit position :
screw position I
alternative unit position :
screw position II
Hexagonal Bar
AF43,6
Hexagonal Bar
AF43,6
Hexagonal Bar
AF37,2
1. Unclip and remove OEM panel
2. Remove 4 screws of OEM
head unit
3. Remove OEM head unit
4. Put mounting frames in
dash board.
Golf VI only: Release screws on
top(see arrows) in order to clear
space for Alpine INE-W928R
If necessary:
Cut away plastic to clear space
for Alpine INE-W928R

Termékspecifikációk

Márka: Alpine
Kategória: nincs kategorizálva
Modell: KIT-8VWX

Szüksége van segítségre?

Ha segítségre van szüksége Alpine KIT-8VWX, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek