Használati útmutató Alpine KIT-W997SMTB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alpine KIT-W997SMTB (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 3.8 csillagra

Oldal 1/2
1
IF IN THE VEHICLE SETTINGS THERE ISN'T THE
CHANGE TIME MENU,
AND YOU WANT TO SET THE VEHICLECLOCK?
PLEASE FOLLOW THE PROCEDURE BELOW:
4
Steering wheel remote control
interface installation kit for:
SMART
Model: For Two / For Four
Year: 2012 >
Kit content: SWRC CAN Bus interface
wiring harness
antenna adapter
radio adapter
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
ATTENTION: CHANGE TIME MENU
- The vehicle must be stationary with the handbrake on
- Turn on and off the vehicle (Key in pos. n°2) for three times;
- Use "volume +" to increase the hours
- Use "Volume -" to increase the minutes
- Use "Voice" to change 12h/24h format
To exit the menu, switch off the
car for at least 5 sec.
NOTE:
When turning on the car, the clock's hands automatically reach the
correct time.
Please note that the clock can have a variation of roughly 1 minute per
month.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
06/2020 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
INSTALLATION MANUAL

Termékspecifikációk

Márka: Alpine
Kategória: nincs kategorizálva
Modell: KIT-W997SMTB

Szüksége van segítségre?

Ha segítségre van szüksége Alpine KIT-W997SMTB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek