Használati útmutató Alpine SPC-R100-DU

Alpine autórádió SPC-R100-DU

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alpine SPC-R100-DU (8 oldal) a autórádió kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra

Oldal 1/8
SPC-R100-DU
SPC-R100-DU
Radial Speaker System
for
Fiat Ducato/ Peugeot Boxer/ Citroen Jumper (X250/ 290)
Installation Manual
SPC-R100-DU
At first you have to disconnect the
plug from the Fiat tweeter. Some
vehicle comes also without
tweeter or cable , then you can
find the plug behind the A-Pillar.
In case of no tweeter cable,
Please connect the speaker
directly to the head unit ISO-
connector.
Remove the two screws from the
right REMIfront top cover with
a PH2 screw driver.
1
2
3
Remove the rubber seal from
the door frame.
SPC-R100-DU
Lift up the A-pillar to access to the
tweeter.
Remove the connector from the
tweeter, if a tweeter is present.
4
5
6
Slightly lift the a-pillar trim with a
plastic assembly wedge to unlock
the upper clips. Be careful to not
lose the clips.

Termékspecifikációk

Márka: Alpine
Kategória: autórádió
Modell: SPC-R100-DU

Szüksége van segítségre?

Ha segítségre van szüksége Alpine SPC-R100-DU, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek