Használati útmutató Alter K3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Alter K3 (1 oldal) a hőmérő kategóriában. Ezt az útmutatót 20 ember találta hasznosnak és 7 felhasználó értékelte átlagosan 4.3 csillagra

Infrared Thermometer User Guide

1.Introduction

Tripod mounting holeSwitch

USB interface

Double-sided adhesive area

Hanging hole

Nameplate

Mode switch hole

Infrared thermometer

Infrared ranging sensor

Temperature display

Alarm light

2.Specification

1. Accuracy: ±0.2 degrees

2. Abnormal automatic alarm: flashing +“Di Di” sound

3. Automatic measurement: measuring distance 5cm ~ 10cm

4. Screen: Digital display

5. Charging method:USB charging or battery(18650 Li-ion).

6. Install method: nail hook, double-sided adhesive sticking, bracket fixing

7. Environment temperature: 10~40Recommended 15~35℃ ℃（℃ ℃）

8. Infrared measuring range: 050～ ℃

9. Response time: 0.5s

10. Input: DC 4.2-5V

11. Weight: 350g

12. Dimensions: 170*115*140mm

13. StandbyAbout one week：

Model: K3

3.Status Description

4.Operation Instruction

1. Standby: The red dot in the bottom of the display lights up in turn. (Fig. 1)

2. Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)

3. : Flashing green lights and alarm ‘Di’. (Fig. 3)Normal temperature

4. Abnormal temperature: Flashing red lights and alarm ‘Di Di’.(Fig. 4)

5. Default:

‘Lo’: Ultra-low temperature alarm. (Fig.5)

‘HI’ : Ultra-high temperature alarm.(Fig. 6)

1. Temperature measurement: Front of the thermometer and approach it within 5-10 cm. (Fig. 7)

Fig. 1Fig. 2Fig. 3

Fig. 4Fig. 5Fig. 6

Fig. 7

5~10cm

2. Mode switching: There is a small hole on the back of the device (Fig. 8). You can use a 3mm diameter screwdriver

to insert the hole and then press the button.

(1) Temperature unit: Press ‘mode switch hole’ then select ‘C’ or ‘F’ (Fig.9, 10) C: Celsius F: Fahrenheit

(2) Mode: Long press 3 seconds and select ‘b’ Fig 11, 12（ ）

Fig. 8Fig. 9Fig. 10Fig. 11Fig. 12

3.Install and replace battery

（ ）1Tear off sticker on the back, remove three screws2Open the back base and install 18650 Li battery（ ）

4.Install method

1.Nail hook3.Double-sided adhesive sticking

2.Bracket fixing

+

-

Termékspecifikációk