Használati útmutató Amazfit Bip 5 Unity
Amazfit
nincs kategorizálva
Bip 5 Unity
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Amazfit Bip 5 Unity (18 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 5.5 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/18
1
Amazfit Bip 5 Unity User Manual
Connection and pairing
Use your phone to scan the QR code in the manual or on the device, and download
and install the Zepp app. For a better user experience, update the app to the latest
version as prompted.
Note: The operating system of your mobile phone must be Android 7.0 or iOS 14.0,
or later.
Initial pairing
When the device is started for the first time, the QR code used for pairing will be
displayed on the screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code
displayed on the device to pair your phone with the device.
Pairing with a new phone
1.
Open the app on your old phone and synchronize data with the device.
2. On the old mobile phone, go to Profile > Amazfit Bip 5 Unity page and tap the
Unpair button at the bottom to unbind. If it is an iPhone, after unbinding in the Zepp
app, you need to unpair the phone and device. Go to Settings > Bluetooth, find the
Bluetooth name corresponding to the device, and tap the button on the far right of the
Bluetooth name. After entering the page, tap Ignore This Device.
3.
Restore the factory settings of the device and then pair it with your new phone
as if it is paired for the first time.
2
Updating the system of your watch
Keep the device connected to your phone, open the Zepp app, go to Profile >
Amazfit Bip 5 Unity > System Update to view or update the system of your device.
We recommend that you tap Update Immediately when your device receives a
system update message.
Wearing
1. Wear the watch strap not too tight or too loose, and leave enough space for the
skin to breathe. This makes you feel comfortable and allows the sensor to function.
2. When measuring blood oxygen, wear the watch correctly. Avoid wearing the
watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately tight)
fitting between the watch and the wrist skin, and keep your arm still throughout the
measurement process. When affected by external factors (arm sag, arm sway, arm
hair, tattoo, etc.), the measurement result may be inaccurate or the measurement
may fail with no output.
3. We recommend that you tighten the watch strap during workout and loosen it
afterwards.
Basic operations
Common gesture operations
Operation
Corresponding result
Tap the screen
Uses a feature, selects the current item, or proceeds
with the next step
Press and hold the
watch face
Activates watch face selection and watch face settings
Cover the screen
Turns off the screen
Swipe from left to right
On most sub-level pages, returns to the upper-level
page
3
Swipe up or down on the
screen
Scrolls or switches pages
Press and hold the upper
button for five seconds
or longer
Powers on, accesses the restart page, and performs
force restart.
Control center
Swipe down from top to bottom on the watch face of the device to enter the Control
Center, where you can access system features of the device.
Supported features: Power Saving mode, DND, Sleep mode, Flashlight, Calendar,
Volume, Brightness, Theater mode, Settings, Keep Screen On,Screen Lock, and
Find My Phone.
Find the phone
1.
Keep the device connected to your phone.
2. Swipe down from top to bottom on the watch face of the device to enter the
Control Center, and tap Find Phone.
Your phone will vibrate.
3.
In the app list, tap Find Phone. Your phone will vibrate.
Find the watch
Keep the device connected to your phone, open the Zepp app, and go to Profile >
Amazfit Bip 5 Unity > Find Watch. Then, the device will vibrate.
Watch faces
Watch face compilations
Some watch faces support editing compilations. With compilations, you can view
steps, calories, weather, and other information, and edit the information as needed.
Edit watch face compilations:
1. Wake up the device, and press and hold the watch face to enter the watch face
Termékspecifikációk
| Márka: | Amazfit |
| Kategória: | nincs kategorizálva |
| Modell: | Bip 5 Unity |
Szüksége van segítségre?
Ha segítségre van szüksége Amazfit Bip 5 Unity, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Amazfit
6 Január 2025
1 Szeptember 2024
23 Augusztus 2024
17 Augusztus 2024
4 Augusztus 2024
1 Augusztus 2024
28 Július 2024
8 Július 2024
28 Május 2024
5 Május 2024
Útmutatók nincs kategorizálva
- nincs kategorizálva Laser
- nincs kategorizálva TomTom
- nincs kategorizálva L.R.Baggs
- nincs kategorizálva Artsound
- nincs kategorizálva Nedis
- nincs kategorizálva DigitSole
- nincs kategorizálva Bowers & Wilkins
- nincs kategorizálva Purell
- nincs kategorizálva Stannah
- nincs kategorizálva ARNOLD Lichttechnik
- nincs kategorizálva Pivo
- nincs kategorizálva Talkaphone
- nincs kategorizálva Ergotec
- nincs kategorizálva Gutfels
- nincs kategorizálva Black Line
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025