Használati útmutató AMX CE-COM2
AMX
AV hosszabbító
CE-COM2
Olvassa el alább 📖 a magyar nyelvű használati útmutatót AMX CE-COM2 (33 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 15 ember találta hasznosnak és 8 felhasználó értékelte átlagosan 4.2 csillagra
Oldal 1/33
INSTRUCTION MANUAL
CE-Series Universal Control Extenders
INSTRUCTION MANUAL
CE-Series Universal Control Extenders
CE-IRS4, CE-IO4, CE-COM2, CE-REL8
IMPORTANT SAFETY INSTRUCTIONS
1.
READ these instructions.
2.
KEEP these instructions.
3.
HEED all warnings.
4.
FOLLOW all instructions.
5.
DO NOT use this apparatus near water.
6.
CLEAN ONLY with dry cloth.
7.
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.
PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11.
ONLY USE attachments/accessories specified by the manufacturer.
12.
USE ONLY with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.
UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14.
REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15.
DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on
the apparatus.
16.
To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle.
17.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
operable.
18.
DO NOT overload wall outlets or extension cords beyond their rated capacity as this can cause electric shock or fire.
19.
Please use the HDMI cable with magnetic ring.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock to persons.
ESD Warning: The icon to the left indicates text regarding potential danger associated with the discharge of static electricity from
an
outside source (such as human hands) into an integrated circuit, often resulting in damage to the circuit.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked flame sources - such as candles - should be placed on the product.
WARNING: Eq
uipment shall be connected to a MAINS socket outlet with a protective earthing connection.
WARNING: To reduce the risk of electric shock, grounding of the center pin of this plug must be maintained.
COPYRIGHT NOTICE
AMX© 2023, all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form
or by any
means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of AMX. Copyright
protection claimed extends to AMX hardware and software and includes all forms and matters copyrightable material and information now
allowed by statutory or judicial
law or herein after granted, including without limitation, material generated from the software programs
which are displayed on the screen such as icons, screen display looks, etc. Reproduction or disassembly of embodied computer
programs or algorithms is expressly prohibited.
LIABILITY NOTICE
No patent liability is assumed with respect to the use of information contained herein. While every precaution has been taken in the
preparation of this publication, AMX assumes no responsibility for error or omissions. No liability is assumed for damages resulting from
the use of the information
contained herein. Further, this publication and features described herein are subject to change without
notice.
AMX WARRANTY AND RETURN POLICY
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3
ESD WARNING
WARNING:
This product is intended to be operated ONLY from the voltages listed on the back panel or the recommended, or included, power supply of the product.
Operation from other voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug
Adapters is cautioned because it
can allow the product to be plugged into voltages in which the product was not designed to operate. If the product is equipped with a detachable
power cord, use only the type provided with your product or by your local distributor and/or retailer. If you are unsure of the correct operational voltage,
please contact your local distributor and/or retailer.
FCC AND CANADA EMC COMPLIANCE INFORMATION:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Approved under the verification provision of FCC Part 15 as a Class A Digital Device.
Caution:
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. CAN ICES-3 (B)/NMB-3(B)
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark; Conforms to European Union Low Voltage Directive 2006/95/EC; European Union EMC
Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/EU;
European Union WEEE (recast) Directive 2012/19/EU; European Union Radio and Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC
WEEE NOTICE:
To avoid ESD (Electrostatic Discharge) damage to sensitive components, make sure you are properly grounded before
When working w
ith any equipment manufactured with electronic devices, proper ESD grounding procedures must be followed to
make sure people, products, and tools are as free of static charges as possible. Grounding straps, conductive smocks, and conductive
work mats are specifically designed for this purpose. These items should not be manufactured locally, since they are generally
composed of highly resistive conductive materials to safely drain static discharges, with- out increasing an electrocution risk in the
event of an accident.
Anyone performing field maintenance on AMX equipment should use an appropriate ESD field service kit complete with at
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous
to life. No user-serviceable parts inside. Refer all servicing to
Place the e
quipment near a main power supply outlet and make sure that you
RISK OF ELECTRIC SHOCK
DO NOT OPEN
C A U T I O N
Termékspecifikációk
| Márka: | AMX |
| Kategória: | AV hosszabbító |
| Modell: | CE-COM2 |
Szüksége van segítségre?
Ha segítségre van szüksége AMX CE-COM2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók AV hosszabbító AMX
2 Január 2025
2 Január 2025
2 Január 2025
2 Január 2025
2 Január 2025
Útmutatók AV hosszabbító
- AV hosszabbító TV One
- AV hosszabbító Adder
- AV hosszabbító LogiLink
- AV hosszabbító Analog Way
- AV hosszabbító Tripp Lite
- AV hosszabbító Steren
- AV hosszabbító Edimax
- AV hosszabbító ConnectPro
- AV hosszabbító Epcom
- AV hosszabbító Peerless-AV
- AV hosszabbító Rose Electronics
- AV hosszabbító Eminent
- AV hosszabbító Gefen
- AV hosszabbító DataVideo
- AV hosszabbító Abus
Legújabb útmutatók AV hosszabbító
8 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025
1 Április 2025
16 Január 2025
14 Január 2025
14 Január 2025
14 Január 2025