Használati útmutató Andis CLC-3
Andis
Szakállvágó
CLC-3
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Andis CLC-3 (13 oldal) a Szakállvágó kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/13

Item pictured may differ from actual product
El artículo ilustrado puede diferir del producto real
Il est possible que l’article sur la photo soit différent du produit réel
Use & Care Instructions CLC-3

2
damaged, or dropped int
to an Andis authorized se
E N G L I S H
Please read the following instructions before using your new Andis
clipper. Give it the care that a fine precision built instrument deserves
and it will give you years of service.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should
always be followed, including the following: Read all
instructions before using the Andis clipper.
DANGER: To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be
pulled into a tub or sink. Do not place in or drop into
water or other liquid.
4. Except when charging, always unplug this appliance from
the electrical outlet immediately after using.
5. Unplug this appliance before cleaning, removing or
assembling parts.
WARNING: To reduce the risk of burns, fire,
electric shock, or injury to persons:
1. An appliance should never be left unattended when
plugged in.
2. Close supervision is necessary when this appliance is
used by, on or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
Andis.
4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or

4
OPERATING INSTRUCTIONS
(Refer to Figure A unless noted).
Before starting your clipper, it must be pre-charged fully before using it for the
first time. To start clipper, push the power button; to stop, push the power
button again.
OIL
A
E
C
D
BLADE
LENGTH SETTING BUTTON
LCD SCREEN
AC/DC POWER ADAPTER
SHIFT KEY
ON/OFF BUTTON
DECELERATION BUTTON
ACCELERATION BUTTON
ADAPTER
CORD PLUG
B
UNIVERSAL AC/DC POWER A
Termékspecifikációk
Márka: | Andis |
Kategória: | Szakállvágó |
Modell: | CLC-3 |
Szüksége van segítségre?
Ha segítségre van szüksége Andis CLC-3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Szakállvágó Andis
11 Augusztus 2024
11 Augusztus 2024
9 Augusztus 2024
8 Augusztus 2024
8 Augusztus 2024
8 Augusztus 2024
7 Augusztus 2024
7 Augusztus 2024
6 Augusztus 2024
6 Augusztus 2024
Útmutatók Szakállvágó
- Szakállvágó Zelmer
- Szakállvágó GA.MA
- Szakállvágó Koenic
- Szakállvágó Becken
- Szakállvágó Beurer
- Szakállvágó Termozeta
- Szakállvágó Concept
- Szakállvágó Adler
- Szakállvágó Remington
- Szakállvágó TriStar
- Szakállvágó Moser
- Szakállvágó Orbegozo
- Szakállvágó Grundig
- Szakállvágó Conair
- Szakállvágó Unold
Legújabb útmutatók Szakállvágó
2 Április 2025
28 Március 2025
27 Március 2025
27 Március 2025
27 Március 2025
27 Március 2025
13 Január 2025
8 Január 2025
5 Január 2025
31 December 2025