Használati útmutató Anton/Bauer NM 38
Anton/Bauer
Accu
NM 38
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Anton/Bauer NM 38 (10 oldal) a Accu kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 3.5 csillagra
Oldal 1/10
One World. One Smart Choice.™
Owner’s Manual
NM14/19
& 28/38
A7595-0366 Rev C
®
Approved Copy
TABLE OF CONTENTS
1 INTRODUCTION
1-2 NM 14/19 BATTERY MODULE DISASSEMBLY
3 NM 14/1919 BATTERY MODULE ASSEMBLY
4-5 NM 28/38 BATTERY DISASSEMBLY
5-6 NM 28/38 BATTERY ASSEMBLY
7 LIMITED WARRANTY
Approved Copy
1
INTRODUCTION
The CINE VCLX series of batteries are designed and manufactured to the high quality expected from all Anton/Bauer batteries. Because of the
specialized and proprietary circuitry that is used in these batteries, the cells inside of any CINE battery must be replaced with an NM14/19 or
NM28/38 module.
The NM14/19 and NM28/38 modules eliminate the need for “re-celling”, long waiting periods and unnecessary shipping of the CINE
® batteries.
The old battery module is simply removed with a few screws, the connectors are unplugged, and the new module is inserted. Then, the old
module can simply be recycled.
The NM14/19 module is the cell replacement module for the CINE VCLX/2 batteries. Please follow the instructions in this manual to ensure
safe and reliable installation. (Note: the NM14/19 module is not for use with the CINE VCLX, and CINE VCLX-CA batteries.)
The NM28/38 module is the cell replacement module for the CINE VCLX and CINE VLCX-CA batteries. As mentioned above, please follow the
instructions in this manual to ensure safe and reliable installation. (Note: The NM28/38 module cannot be used with the CINE VCLX/2 batter-
ies.)
If you have any questions or concerns, please contact our customer support group at support@antonbauer.com or if inside the U.S. at (800)
541-1667.
STEP 1
Remove the (2) #10 screws and (2) # 10 washers as shown in gure A.
Note: Do not remove handle or handle hardware from side plates.
STEP 2
Remove the (4) 6-32 screws and (4) 6-32 washers as shown in gure B.
NM 14/19 BATTERY MODULE DISASSEMBLY OF UNIT
Figure A Figure B
#10
screw
QTY 2
6-32
screw
QTY 4
Approved Copy
Termékspecifikációk
| Márka: | Anton/Bauer |
| Kategória: | Accu |
| Modell: | NM 38 |
Szüksége van segítségre?
Ha segítségre van szüksége Anton/Bauer NM 38, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Accu Anton/Bauer
20 Augusztus 2024
Útmutatók Accu
- Accu Leica
- Accu Renata
- Accu Digitus
- Accu Whistler
- Accu Victron Energy
- Accu Crestron
- Accu Aluratek
- Accu Lenmar
- Accu For_Q
- Accu Impact
- Accu PNY
- Accu Team Orion
- Accu Stinger
- Accu Ranex
- Accu Cocraft
Legújabb útmutatók Accu
3 Április 2025
10 Január 2025
4 Január 2025
3 Január 2025
1 Január 2025
31 December 2025
31 December 2025
31 December 2025
30 December 2025
30 December 2025