Használati útmutató APC SMT2200I-BNDL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC SMT2200I-BNDL (18 oldal) a szünetmentes tápegység (UPS-ok) kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2.5 felhasználó értékelte átlagosan 3.7 csillagra

Oldal 1/18
Operation Manual
Smart-UPS
Uninterruptible Power Supply
Tower
750/1000/1500/2200/3000 VA
100/120/230 Vac
500 VA
100 Vac
1Smart-UPS 750/1000/1500/2200/3000 VA 100/120/230 Vac / 500 VA 100 Vac Tower
Overview
Product Description
The APC by Schneider Electric Smart-UPS is a high performance uninterruptible power supply (UPS). The UPS
provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges, small utility
power fluctuations and large disturbances. The UPS also provides battery backup power for connected equipment until
utility power returns to safe levels or the batteries are fully discharged.
This user manual is available on the enclosed CD and on the APC by Schneider Electric Web site, www.apc.com.
Important Safety Messages
Read the instructions carefully to become familiar with the equipment before trying to install, operate, service or
maintain it. The following special messages may appear throughout this manual or on the equipment to warn of
potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of this symbol to a Caution product safety label indicates that a hazard exists that can result in
injury and product damage if the instructions are not followed.
The following safety messages may appear throughout this manual to warn of potential hazards.
Safety and General Information
Inspect the package contents upon receipt. Notify the carrier and dealer if there is any
damage.
Read the Safety Guide supplied with this unit before installing the UPS.
Adhere to all national and local electrical codes.
This UPS is intended for indoor use only.
Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.
The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient
temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life.
Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords.
The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.
The model and serial numbers are located on a small, rear panel label. For some models, an additional label is
located on the chassis under the front bezel.
Always recycle used batteries.
Recycle the package materials or save them for reuse.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, can result in equipment damage and minor or moderate injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, can result in equipment damage.

Termékspecifikációk

Márka: APC
Kategória: szünetmentes tápegység (UPS-ok)
Modell: SMT2200I-BNDL
Termék színe: Fekete
Kijelző típusa: LCD
Tömeg: 48800 g
Magasság: 435 mm
Szélesség: 197 mm
Mélység: 544 mm
Csomagolás tömege: 61900 g
Csomagolás mélysége: 762 mm
Csomagolás magassága: 699 mm
Csomagolás szélessége: 381 mm
Zajszint: 45 dB
Bemeneti kapcsolat típusa: BS1363A & IEC-320 C20 & Schuko CEE 7/EU1-16P
LED-kijelzők: Igen
Akkumulátor-technológia: Zárt savas ólom (VRLA)
Akkumulátor töltési ideje: 3 ó
Akkumulátor típus: RBC55
Üzemi hőmérséklettartomány (T-T): 0 - 40 °C
Tárolási hőmérséklettartomány (T-T): -15 - 45 °C
Relatív üzemi páratartalom-tartomány: 0 - 95 %
Tárolási relatív páratartalmi tartomány: 0 - 95 %
Fenntarthatósági tanúsítványok: RoHS
USB 2.0 portok száma: 1
Bemeneti frekvencia: 47/63 Hz
Kimenő teljesítmény: 1980 W
Tanúsítványok: CE, EN 50091-1, EN 50091-2, VDE\r\nREACH
AC kimenetek típusai: C13 coupler, C19 coupler
UPS topológia: Vonal interaktív
Kimeneti összteljesítmény (VA): 2.2 kVA
Bemeneti működési feszültség (min.): 151 V
Bemeneti működési feszültség (max.): 302 V
Kimeneti működési feszültség (min.): 220 V
Kimeneti működési feszültség (max.): 240 V
Automatikus feszültségszabályozás (AVR): Igen
Hallható riasztás(ok): Igen
Automatikus újraindítás: Igen
AC kimenetek száma: 9 AC kimenet(ek)
Kimeneti IEC jumperek száma: 2
Üzemi magasság: 0 - 3000 M
RS-232 port: 1
Nem üzemeltetési magasság: 0 - 15000 M
Hatékonyság: 97.9 %
Névleges bemeneti feszültség: 230 V
Névleges kimeneti feszültség: 230 V
Kimeneti kapcsolatok: 8 x C13 & 1 x C19
Túlfeszültség szabályozása: 365 J
Általános mentési idő féltöltöttség mellett: - perc
Általános mentési idő teljes töltöttség mellett: - perc
Hullámalak: Szinusz
Vészhelyzeti kikapcsolás (EPO): Igen
Hidegindítás: Igen
Üzem közben cserélhető akkumulátorok: Igen
Automatikus akkumulátor teszt: Igen
Túlfeszültség védelem: Igen

Szüksége van segítségre?

Ha segítségre van szüksége APC SMT2200I-BNDL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek