Használati útmutató APC Symmetra PX Power Module

APC UPS Symmetra PX Power Module

Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC Symmetra PX Power Module (2 oldal) a UPS kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/2
Symmetra® PX Power Module Replacement
See the Safety sheet (990-2984) provided with the unit for additional safety instructions.
Warning: Only trained persons familiar with the construction and operation of the
equipment, as well as the electrical and mechanical hazards involved, may install and
remove system components.
How to replace a power module
Warning: Before removing any power modules, make sure that the remaining power
modules can support the load.
Turn the locking latch until the arrow points down.
Unscrew the spring-activated knobs on both sidea of the module.
Pull the module up and out of the enclosure as far as the lock mechanism will allow.
Release the lock by pressing the black plastic tab on both sides of the module.
Pull the module out of the enclosure.
Push the replacement module into the enclosure.
Caution: Do not attempt to insert the power module using unnecessary force.
Tighten the spring-activated knobs on both sides of the module to ensure proper contact.
Use two people to lift components weighing between 18–32 kg (40–70 lb).
1
1
1
1

Termékspecifikációk

Márka: APC
Kategória: UPS
Modell: Symmetra PX Power Module

Szüksége van segítségre?

Ha segítségre van szüksége APC Symmetra PX Power Module, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek