Használati útmutató Arcam Solo Logo

Arcam mélynyomó Solo Logo

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Arcam Solo Logo (8 oldal) a mélynyomó kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/8

E-2

This product is designed and manufactured to meet

strict quality and safety standards. However, you

should be aware of the following installation and

operation precautions.

1. Take heed of warnings and instructions

It is important that you:

A. read all the safety and operating instructions

before operating this speaker.

B. keep this handbook for future reference.

C. follow all instructions and adhere to all warnings

in the handbook or on the speaker.

2. Water and moisture

Do not use this speaker near water.

The presence of electricity near water can be

dangerous – for example next to a bathtub,

washbowl, kitchen sink, in a wet basement or near a

swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are

not spilled, dripped or splashed into the enclosure

through any openings. Liquid-ﬁlled objects such as

vases should not be placed on the equipment.

4. Ventilation

Do not block any of the ventilation openings.

Do not place the equipment on a bed, sofa, rug or similar

soft surface, or in an enclosed bookcase or cabinet, since

ventilation may be impeded. We recommend a minimum

distance of 50mm around the sides and top of the

appliance to provide adequate ventilation.

5. Heat

Do not install the speaker near any heat producing

equipment such as radiators, stoves or other

appliances (including other ampliﬁers) that produce

heat.

6. Climate

The appliance has been designed for use in moderate

climates.

7. Siting the unit

The unit is designed for placing in a rack or stand. not

It should be placed directly on the ﬂoor and sited

where electrical and other leads do not cause a trip

hazard.

8. Power sources

The speaker is supplied with a market-suitable

electrical plug. Do not substitute or modify the

supplied plug – see your dealer if a replacement is

required.

This product is a Class II or double insulated electrical

appliance. It has been designed in such a way that

it does not require a safety connection to electrical

earth (U.S. = ground).

The primary method of isolating the Logo speaker

unit from the mains supply is to use the switch on

the rear of the unit. The Logo speaker unit must be

installed in a manner that makes plug disconnection

possible.

9. Power-cord protection

Power supply cords should be routed so that they

are protected against being walked on or pinched,

particularly at plugs and the point where they exit

from the speaker.

10. Protection from electrical storms

Unplug the speaker during lightning storms or when

unused for long periods of time.

11. Abnormal smell

If an abnormal smell or smoke is detected from the

appliance, turn the power off immediately and unplug

the unit from the wall outlet. Contact your dealer

immediately.

12. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a

soft, dry, lint-free cloth. Do not use paint thinners or

other chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays

or polishes as they can cause indelible white marks if

the unit is subsequently wiped with a damp cloth.

13. Servicing and repair

Refer all servicing to qualiﬁed servicing personnel.

Servicing is required when: the speaker has been

damaged in any way, such as:

A. the power-supply cord or the plug has been

damaged, or

B. liquid has been spilled, or objects have fallen

into the enclosure, or

C. the appliance has been exposed to rain or

moisture, or

D. the appliance does not appear to operate

normally or exhibits a marked change in

performance, or

E. the appliance has been dropped or the

enclosure damaged.

This product has been designed to meet the IEC

60065 international electrical safety standard.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service

personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’

within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully

into the socket.

English

E-3

... and congratulations for buying the Arcam Logo sub-bass loudspeaker system.

Logo can extend the bandwidth of your main (satellite) speakers by accurately revealing the low

frequency components of stereo and surround-sound programme sources. It also offers a separate

but concurrent LFE (low frequency effects) connection – this is a channeI intended by the recording

engineer to be exclusively reproduced by a subwoofer. Logo’s own volume control permits the level to

be adjusted independently to achieve a perfect balance in the listening room.

Logo features its own 200W ampliﬁer which is close-coupled to a downward-facing long-excursion

driver that takes full advantage of the latest materials technology and a sophisticated braced

cabinet design. The bass response is actively corrected by a Linkwitz transform crossover circuit to

give a Bessel alignment: this minimizes time distortion for accurate bass transients. The result is a

performance of great power and musicality.

Please take a moment to read this handbook, as the advice that it contains will help you get the

maximum beneﬁt from your purchase.

The Logo Development Team

safety guidelines ...................................... E-2

Important safety instructions .................E-2

Safety compliance ..........................................E-2

thank you… ............................................. E-3

installation ................................................ E-4

Positioning the unit .......................................E-4

Power ....................................................................E-4

Interconnect cables .......................................E-4

Connecting to a sound source .............E-4

Care of your speaker ..................................E-4

speaker positioning ................................ E-5

Stereo system with no LFE .....................E-6

connection ............................................... E-6

Sub/full range+sat system ........................E-6

Sub/sat system .................................................E-6

Direct mode in Arcam surround

ampliﬁers .............................................................E-6

Crossover frequency setting ...................E-7

Crossover Q setting.....................................E-7

Volume level setting .....................................E-7

Phase setting .....................................................E-7

calibration ................................................. E-7

speciﬁcation ............................................. E-8

Technical speciﬁcations ...............................E-8

Worldwide Guarantee ...............................E-8

Claims under guarantee ............................E-8

Problems? ............................................................E-8

On-line registration ......................................E-8

What’s in the box?

< Arcam Logo sub-bass system

< IEC mains power lead

< this Handbook!

Termékspecifikációk

Márka:	Arcam
Kategória:	mélynyomó
Modell:	Solo Logo
Termék színe:	Fekete
Mélysugárzó frekvenciatartománya:	- Hz
Mélysugárzó RMS-teljesítménye:	200 W
Mélysugárzó szélessége:	300 mm
Mélysugárzó mélysége:	295 mm
Mélysugárzó magassága:	430 mm
Mélysugárzó típusa:	Aktív mélynyomó
Mélysugárzó tömege:	15000 g