Használati útmutató Arkon RCBTABLED

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Arkon RCBTABLED (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 27 ember találta hasznosnak és 6 felhasználó értékelte átlagosan 4.4 csillagra

Telescoping pole extends

upward from 17 inches to

29 inches.

Compatibility:

Fits smartphones with

cases weighing up to 2

pounds and measuring

up to 4” wide.

IMPORTANT:

Do not overtighten ring.

Overtightening may

damage threads on

holder and also make it

difficult to adjust phone

and tablet holders.

34

2

Insert pole into base.

PLEASE NOTE—this will be a tight fit and will require some force.

Your Remarkable Creators Bundle will arrive in eight pieces:

Telescoping Pole

25mm to 1/4”-20

Camera Bolt Adapter

(optional)

Weighted Base

with Allen Wrench

1

RVB

Attach overhead arm assembly by un

the pole until

Unscrew tightening ring from holder.

Place ring over the 17mm end of mount

then snap the holder onto the ball. Set to

desired position, then tighten ring.

Using two hands, insert phone into the

holder by pushing the device into one of the

spring-loaded support arms. Expand the other

support arm and fully insert device until it lays

flat against the blue rubber pad.

SP25MMCAM

Assembled Mount

S0

SPHD8BASE

SPHD8L29

Tighten clockwise

to secure.

Tighte

Teles

Pol

Tightening

Knob

Collar

Mal

de

Continued on page 2

RCBTABLED| Remarkable Creators Video Phone Stand Bundle

rev.053118

SPHD8L29

SPHD8BASE

Phone Holder

LED Ring Light

RV001WR-B

Overhead Arm

Assembly

SP3RMPR0

Clamp Post Mount

GN031-SBH-B

SPLEDRING

TAB001

GN031-SBH-B

5

Shafts can be adjusted by unscrewing

the shafts’ knobs to loosen. Tighten

knobs to set.

Tablet Holder

TAB001

Termékspecifikációk