Használati útmutató Asus GigaX 1016D
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Asus GigaX 1016D (4 oldal) a router kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 4 felhasználó értékelte átlagosan 4.8 csillagra
Oldal 1/4
¤
GigaX 1016D
Desktop Fast Ethernet Switch
English
Quick GuideInstallation
English
2ASUS GigaX 1016D
Thank you for buying the ASUS GigaX 1016D Desktop Fast Ethernet Switch! ASUS
GigaX 1016D switch provides non-blocking, wire-speed performance to meet your
intensive network needs. This switch comes with 16 Fast Ethernet ports with auto-
sensing and auto MDI/MDIX capabilities. With easy connectivity and flow control,
GigaX 1016D is guaranteed to enhance your network performance and productivity.
Features
• 16 10/100 Mbps RJ-45 ports
• Up to 200Mbps for all ports in full duplex mode.
• Plug-and-play: Auto MDI/MDIX and auto-sensing for speed and duplex
mode on all ports.
• Flow control schemes (802.3x in full duplex mode) to support zero loss
under temporary network congestion.
• 4K MAC address learning and aging
• Easy to read indicators provide quick indication of link status.
Package Content
Before installing the GigaX 1016D switch, check your package for the following
items. Contact your retailer if any of items is damaged or missing.
• GigaX 1016D
• Power Adaptor
• Quick Installation Guide
• ASUS Networking Sticker
Front panel
Power Indicator Status Indicator
INDICATOR COLOR STATUS INDICATION
POWER GREEN ON The switch is powered on.
OFF The switch is powered off.
STATUS GREEN ON A link is established.
BLINKING Receiving or transmitting data packets.
Introduction
h
s
i
l
g
n
E
3
ASUS GigaX 1016D
Rear panel
Connecting Network Devices
To connect network devices to the GigaX 1016D switch.
1. Connect one end of the Ethernet cable to an Ethernet port on the back of
the switch. Connect the other end to the Ethernet port on the network
device. Repeat this step to connect additional network devices.
Note: Use Category 5 Ethernet straight-through cables to ensure proper connection between
the switch and the other network devices.
Note: The Ethernet ports on the switch may be used as uplink ports to other switches, hubs,
bridges, or repeater. The switch is capable of detecting and adjusting either cross-over or
straight-through cables.
2. Plug the AC adaptor to an electrical outlet, then plug the other end to the
power connector on the back of the switch.
3. The power indicator and active port indicators will light up indicating
that the device is turned ON and in use.
Placing the switch on a flat surface
Place the switch on a flat surface that can support the weight of the switch and its
accessories. Make sure the surface meets the operating environment specifications.
NOTE: The length of the UTP Category 5 cable should not exceed 100 meters.
Placement options
RJ-45 Ethernet
Connector s
AC Power Input
AC IN
Termékspecifikációk
| Márka: | Asus |
| Kategória: | router |
| Modell: | GigaX 1016D |
Szüksége van segítségre?
Ha segítségre van szüksége Asus GigaX 1016D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók router Asus
9 Április 2025
31 December 2025
19 December 2024
9 December 2024
9 December 2024
9 December 2024
26 Szeptember 2024
12 Szeptember 2024
11 Szeptember 2024
1 Szeptember 2024
Útmutatók router
- router Blustream
- router T-com
- router Verizon
- router TCL
- router Digitalinx
- router 7inova
- router ModeCom
- router Dahua Technology
- router A-NeuVideo
- router Silentwind
- router Vimar
- router RAVPower
- router StarIink
- router Beafon
- router Lumantek
Legújabb útmutatók router
9 Április 2025
9 Április 2025
31 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
30 Március 2025
23 Március 2025
15 Január 2025