Használati útmutató Atdec A-STSWW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atdec A-STSWW (6 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 4.5 felhasználó értékelte átlagosan 5.0 csillagra

Oldal 1/6
Installation Instructions
Wall Mounted
Sit-to-Stand Workstation
Component Checklist
Step 1. Check Components
AB C D E
Lower Arm Upper Arm Vertical Screen
Slider Keyboard Tray Tilt Head
A-STSWW
• 8mm wrench
• Drill
• 10mm masonry bit
• 4.5mm drill bit
• Ratchet
• Spirit Level
• Stud Finder
• Pencil
5mm Allen 6mm Allen2.5mm Allen
M6X8 (x1) M4x10 (x4)M6X12 (x4)M8X20 (x1)
8mm
¼” Drive
Velcro
Strip (x2)
H J K L M N
PO Q R S T
Tools Required
Plastic
Washer (x1)
Coach
Screw (x6) Nylon
Anchor (x6)
Metal
Washer (x1)
M6X10 (x3)
Hardware
F G
Wall Mounting Hardware
Check that you have received all parts against the Component Checklist.
! IMPORTANT - Install as per Installation Instructions
! The manufacturer accepts no responsibility for incorrect installation.
! This product supports a maximum load 8Kg (17.6lbs.)
! The wall mount can be installed on vertical, flat, solid concrete or brick walls, or timber stud walls only.
! The wall should be strong enough to sustain a weight of at least four times that of the display and wall mount bracket combined.
If in doubt, consult a structural engineer.
! Check wall anchors and screws every 3 months from the time of installation to ensure the workstation is firmly fixed to the wall.
! Tighten all screws (do not exert excessive force to avoid breaking the screws or damaging their thread)
IMPORTANT INFORMATION

Termékspecifikációk

Márka: Atdec
Kategória: nincs kategorizálva
Modell: A-STSWW

Szüksége van segítségre?

Ha segítségre van szüksége Atdec A-STSWW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek