Használati útmutató Atdec TH-1032-VFM
Oldalak 2 Angol nincs kategorizálva
Olvassa el ingyen online a(z) Atdec TH-1032-VFM használati útmutatóját, vagy töltse le PDF-ben. Az útmutatót 21 alkalommal tekintették meg. Kérdése van a modellről? Tegyen fel kérdést
Masonry Wall
- Drill two 10mm (0.4”) diameter holes, 50mm (2”) deep.
- Secure the Mounting Plate to the wall using the Coach
Bolts and Concrete Anchors supplied.
Component Checklist
Coach Bolt (x2)
Concrete Anchor (x2)
M4/5 Spacer (x4)
Security Screw (x1)
3mm Allen Key
M4x16/25mm
(x4 each)
M5x16/25mm
(x4 each)
M6x16/30mm
(x4 each)
TH-1032-VFM
Flat Screen Wall Mount / Full Motion
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received all parts against the component checklist and Hardware above.
Step 2. Attaching Arm to the Wall
! IMPORTANT - Install 1032 Flat Screen Wall Mount as per Installation Instructions.
! This product supports a maximum load of 25kg (55lbs).
! This product supports VESA mounting hole configurations: VESA plate, 75x75mm, 100x100mm, 200x100mm,
and 200x200mm.
! The manufacturer accepts no responsibility for incorrect installation.
Display Mounting Screws
Hardware
Tools Required:
Power Drill
•
6mm (0.25”) Drill Bit
•
10mm (0.4”) Masonry Drill Bit
•
Phillips-head Screwdriver•
13mm (0.5”) Socket Wrench or Shifter
•
Remove the Arm from the packaging and open fully.
Un-clip the Wall Plate Cover and slide down the arm.
Slide the Wall Plate Cover back along
the arm, and push flat against the wall.
Wall Plate Cover
M4/M5 Washers
(x4 each)
M6/8 Spacer (x4)
M8x16/30mm
(x4 each)
Arm AssemblyVESA Plate
- Drill two 6mm (0.25”) diameter holes, 50mm (2”) deep.
- Secure the Mounting Plate to the wall using the Coach
Bolts supplied.
Timber Stud Wall
OR
Termékspecifikációk
| Márka: | Atdec |
| Kategória: | nincs kategorizálva |
| Modell: | TH-1032-VFM |
Szüksége van segítségre?
Ha segítségre van szüksége Atdec TH-1032-VFM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek