Használati útmutató Atlas Sound FAP40T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atlas Sound FAP40T (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 16 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.8 csillagra

AtlasSound.com 1/4

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. ATS001618 RevD 8/11

Strategy Series® II In-Ceiling 4" Speaker System

FAP40T(B)

Specifications

Power Rating 16 Watts (8Ω)

Transformer Taps 1, 2, 4, 8, & 16 Watts & 8 BypassΩ

Frequency Response 100Hz – 12kHz (±3dB)

80Hz – 15kHz (±5dB)

Sensitivity (1W / 1M) 87dB

Woofer 4" Polypropylene with SBR Surround

Woofer Magnet Weight 13 oz (369g)

Bezel Diameter 73⁄8" (187mm)

Overall Height 71⁄8" (181mm)

Cut-Out Diameter 65⁄16" (160mm)

Features

• Tuned & Ported Design for Extended Bass Response

• 16 Watts Internal Transformer

• 8ΩTransformer Bypass Setting

• Low Profile Plastic Enclosure

• Input Via 2 Pole Terminal Strip

• Press-Fit Grille Blends Perfectly into Contemporary Architecture

• Lightweight Construction Makes Use of Additional Support in Drywall

Ceilings Unnecessary

• Tile Bridge Included

• Perfect Companion with the FAPSUB Subwoofer System When Sub

Bass Is Required

• Also Available in Black FAP40T-B

• UL 1480 Listed

Applications

Designed to provide high performance in a very compact footprint, the

FAP40T appeals to both system designers and architects. FAP40T is ideal

for high-intelligibility voice, music, and signal reproduction in commercial,

industrial, and institutional applications.

General Description

A unique, patented tap selector switch design allows for easy system

tuning. A full selection of taps up to 16 Watts as well as an 8 transΩ-

former bypass setting is included for maximum system versatility. This

switch "knob" also functions as a diffuser cone, providing smooth, even

dispersion of the high frequency content from the center of the 4" poly-

propylene driver. In fact, the high frequency response of the FAP40T is

so natural that many would assume that the driver in the FAP40T was a

coaxial design instead of a single cone driver.

Low frequency response is enhanced by the tuned and ported enclosure

design. The enclosure (UL1480 Listed) is constructed of high impact

injection molded plastic and includes a press fit grille design that blends

well with contemporary architecture.

A two pole terminal strip housed below a removable metal cover on the

back of the FAP40T enclosure allows for easy system wiring as well as

"daisy chain" wiring to other FAP40Ts or even FAPSUB subwoofers (a

great combination).

FAP40T

FAP40T-B

Termékspecifikációk