Használati útmutató Atlona AT-VCC-IR-KIT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atlona AT-VCC-IR-KIT (12 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 18 ember találta hasznosnak.

/ 12 PDF

Installation Guide

AT-VCC-IR-KIT

1

IP to IR Command Converter for Velocity Control System

AT-VCC-IR-KIT

The Atlona AT-VCC-IR-KIT is an accessory for the Atlona Velocity™ Control System that provides

conversion from IP control commands to IR. This Velocity Control Converter is very compact

and can be placed anywhere a device requires IR control. The VCC-IR-KIT is remotely powered

through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs

onto any surface via a convenient mounting dock. A simple “click” locks it into place for a secure,

reliable installation. The IR adapter module includes three 3.5 mm ports for connecting the AT-

VCC-IR-EMT emitters. Each port is independently addressable, allowing discrete IR control of

three dierent AV devices.

1 x AT-VCC

1 x AT-VCC-IR

Package Contents

Operating Notes

•The Velocity Command Converter must be on the same network as the Velocity Gateway

(AT-VGW-250) or it will be unable to sync for control.

•The AT-VCC-IR-KIT is PoE, to power the unit, simply plug it into a PoE compatible network

switch. If the network switch is not PoE capable, a PoE injector or USB (purchased separately)

can be used.

•All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the

DHCP IP address reserved for each individual device.

IMPORTANT: Velocity Gateway (AT-VGW-250) must be set up before the AT-VCC-IR-KIT

is fully functional.

Termékspecifikációk