Használati útmutató Audio-Technica AT-HS6
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Audio-Technica AT-HS6 (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 11 felhasználó értékelte átlagosan 4.6 csillagra
Oldal 1/2
Safety precautions
• Keep the product out of the reach of small
children to avoid accidental ingestion of
screws, nuts and washers, or damage to
product.
• Do not use the product for any purpose other
than to mount a phono cartridge.
• Do not put the product in a location where it
is exposed to direct sunlight, near heating
devices, or in places with high temperatures,
high humidity, or high concentrations of dust.
• Do not attempt to disassemble or modify the
product.
• Do not subject the product to strong impact.
User Manual / Headshell
Thank you for purchasing this Audio-Technica
product. Before using the product, read through this
user manual to ensure that you will use the product
correctly. Please keep this manual for future
reference.
Name of each part
Specifications
Material : Aluminum
Weight
(excluding cartridge
installation screws)
: Approx. 9.3 g (0.33 oz) (including
lead wires)
Approx. 8.4 g (0.30 oz) (excluding
lead wires)
Dimensions
(excluding connector
and protrusions)
: 13.0 mm (0.51”) × 21.4 mm (0.84”)
× 48.9 mm (1.93”) (H × W ×D)
Accessories : Cartridge installation slotted screw
(M2.6) (10 mm × 2 and 8 mm × 2),
Nut x 2, Plastic washer x 2
Specifications are subject to change without notice due to
improvements.
How to install
1. Mount a cartridge onto the headshell using
the cartridge installation slotted screw and
plastic washer provided, and tighten lightly so
that cartridge position can be adjusted.
• When using a cartridge without threaded inserts,
use screws and nuts to install the cartridge.
• Take care that the screws are short enough so as
not to touch and damage the record.
• Read the user manual of the cartridge.
2. Slide the lead tips over the cartridge
connections.
• Do not apply heat.
• Use tweezers, small pliers, and non-magnetic
screwdriver(s) to mount the headshell/cartridge.
•If a lead tip is loose, flatten it out slightly to attach it.
●Layout of headshell leads
3. Loosen screws with a non-magnetic
screwdriver and adjust for overhang. Tighten
the screws firmly when position is fixed.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2019 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
ver.1 2018.08.01
162501280-01-02 ver.2 2019.08.01
AT-HS6
If you are unsure about the overhang
adjustment, align the stylus tip with the stylus
on the cartridge that originally came with the
turntable (see figure below).
4. Attach the headshell to the tonearm.
5. Refer to the turntable's user manual and
adjust the tonearm balance, tracking force
and anti-skate.
Other language versions of this manual are
available for download at
http://eu.audio-technica.com/
Top vie
Cross section of screw hole
Screw holes
Side view Rubber washer
Lead tip
Lead wire
Connector
Cartridge installation
slotted screw
Plastic washer
Front view
(left channe
n
t channel / –)
Overhang adjustment
Loosen screws
and adjust the
position
(Unit : mm)
21.419.6
10.5
1.5
2.5
48.9
13.0
Threaded insert
Cartridge that came
with turntable
Make this
distance as
exact as
possible.
Connected cartridge
AT-HS6
W
(left channe t channel / +)
Termékspecifikációk
| Márka: | Audio-Technica |
| Kategória: | nincs kategorizálva |
| Modell: | AT-HS6 |
Szüksége van segítségre?
Ha segítségre van szüksége Audio-Technica AT-HS6, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nincs kategorizálva Audio-Technica
28 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
Útmutatók nincs kategorizálva
- Gossen Metrawatt
- PcDuino
- Adidas
- Moomin
- CaterRacks
- BlueDri
- Elite Force
- TomTom
- Eikon
- Coors Light
- Manitowoc
- Zotac
- HeartSine
- TRIUS
- SABO
Legújabb útmutatók nincs kategorizálva
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025