Használati útmutató Audio-Technica ATM230
Audio-Technica
mikrofon
ATM230
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Audio-Technica ATM230 (2 oldal) a mikrofon kategóriában. Ezt az útmutatót 17 ember találta hasznosnak és 9 felhasználó értékelte átlagosan 4.7 csillagra
Oldal 1/2
ATM230
Hypercardioid Dynamic Instrument Microphone
FORM No. ATGC-L0333-16-E
Machida • Tok yo • Japan
polar pattern
0°
330°
300°
270°
240°
210°
180°
150°
120°
90°
60°
30°
8 kHz
200 Hz
1 kHz
5 kHz
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
10 dB
20k10k5k2k1k50020010050
LEGEND
frequency response
Frequency in Hertz
Response in dB
12” or more on axis
Specifications
Element Dynamic
Polar pattern Hypercardioid
Frequency response 30-12,000 Hz
Open circuit sensitivity -54 dB
(1.9 mV)
re 1V at 1 Pa
Impedance 600 ohms
Weight 292 g
Dimensions 82.5 mm - long,
38.0 mm - maximum diameter
Output connector Integral 3-pin XLRM-type
Accessories furnished AT8665 drum mount for 5/8"-27 threaded
adapter;
5/8"-27 to 3/8"-16 threaded adapter;
Soft protective pouch
Features
•Tailoredtocapturesoundfromrackandfloortoms,snaredrumsand
otherpercussioninstruments
•HandlesveryhighSPLatcloserange
•Hypercardioidpolarpatternreducespickupofsoundsfromthesides
andrear,improvingisolationofdesiredsoundsource
•Rareearthmagnetforimprovedoutputandtransientresponse
•Low-profiledesignpermitsversatileplacementarounddrumkit
•Rugged,all-metalconstructionensuresdependableperformancein
live-musicandstudioapplications
•Integral5/8"-27threadedstandclampworkswithincludeddrum
mounttopermitmountingofmictodrumrim
Description
The ATM230 is a dynamic microphone with a hypercardioid polar pattern. It
is designed specically for musical instrument pickup in the studio and on
stage.
The hypercardioid polar pattern of the microphone is more sensitive to
sound originating directly in front of the element, making it useful for
controlling feedback and reducing pickup of unwanted sounds.
The output of the microphone is a 3-pin XLRM-type connector.
The microphone is enclosed in a rugged housing and is outtted with an
integral 5/8"-27 threaded stand clamp. The included AT8665 drum mount
screws into the stand clamp to permit mounting of the ATM230 to the rim
of a drum. A soft protective pouch is also included.
Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2
and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”- positive acoustic
pressure produces positive voltage at Pin 2.
To avoid phase cancellation and poor sound, all mic cables must be wired
consistently: Pin 1-to-Pin 1, etc.
Avoid leaving the microphone in the open sun or in areas where
temperatures exceed 43° C for extended periods. Extremely high humidity
should also be avoided.
Take care to keep foreign particles from entering the windscreen. An
accumulation of iron or steel filings on the diaphragm, and/or foreign
material in the windscreen's mesh surface, can degrade performance.
Termékspecifikációk
| Márka: | Audio-Technica |
| Kategória: | mikrofon |
| Modell: | ATM230 |
Szüksége van segítségre?
Ha segítségre van szüksége Audio-Technica ATM230, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók mikrofon Audio-Technica
13 Január 2025
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
Útmutatók mikrofon
- mikrofon Glemm
- mikrofon Hähnel
- mikrofon Power Dynamics
- mikrofon Bontempi
- mikrofon Boss
- mikrofon Speco Technologies
- mikrofon Nady
- mikrofon The T.bone
- mikrofon Apart
- mikrofon Thomson
- mikrofon Point Source Audio
- mikrofon Mackie
- mikrofon Steren
- mikrofon Turtle Beach
- mikrofon ClearOne
Legújabb útmutatók mikrofon
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
2 Április 2025
2 Április 2025
2 Április 2025