Használati útmutató Audix ANTDA4161
Audix
TV antenna
ANTDA4161
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Audix ANTDA4161 (2 oldal) a TV antenna kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 6.5 felhasználó értékelte átlagosan 4.9 csillagra
Oldal 1/2
ACTIVE DIRECTIONAL ANTENNA
User Guide
ANTDA4161
ANTDA4161
DIMENSIONS
audixusa.com | 503.682.6933
©2016 Audix Corporation All Rights Reserved.
Audix and the Audix Logo are trademarks of
Audix Corporation.
Fig. 3
1.25 in / 32 mm
9.4 in / 238 mm
9.6 in / 245 mm
ANTDA4161
PRODUCT DESCRIPTION
The ANTDA4161 is an active remote antenna for use with the Performance
Series Wireless Systems. It offers an antenna gain stage of 60 dB, and an
amplifier gain stage of 15 dB. Having the ANTDA4161 allows antennas to be
placed up to 100’ (30 meters) away from the receiver without any loss of signal.
SPECIFICATIONS
Frequency Band 500 - 700 MHz
Antenna Gain 6 dB
Amplier Gain 5 dB or 13 dB
(dipswitch located inside
housing on antenna)
Input Impedance 50 Ohm
Output OIP3 > 38 dBm
Eective working Angle Approximately 90 degrees
Connector BNC
Cable RG58, 50 Ohm coaxial (not included)
Net Weight 8 ounces / 227 grams
SET UP
1 Determine whether to engage the 13 dB signal boost located inside the
electronics housing. There is a gain setting inside the booster box located
on the antenna (Figure 1). The default setting is 5 dB which covers up to 25’
of cable length. For longer runs (up to 100’), the 13 dB setting may be used.
The dipswitch is located inside the weather resistant booster box. Remove
the 6 Allen bolts and then set the dipswitch to 13 dB, then reattach the
cover and Allen bolts.
2 Mount the antenna system on to a mic stand. For permanent installations,
the antennas may be placed on a wall or hung from the ceiling.
3 Connect the coaxial cable from each of the inputs on the receiver to the
connector on the ANTDA4161. Be sure to use 50 Ohm cable.
4 Point and shoot the antennas directly at the transmitter source. (see figure 2)
5 Once the wireless system is in the performance mode, some
experimentation may be required to find the best position.
Mic Stand Adapter
ANTDA4161
ANTDA4161
Fig. 1
Fig. 2
ANTDA4161
Termékspecifikációk
| Márka: | Audix |
| Kategória: | TV antenna |
| Modell: | ANTDA4161 |
Szüksége van segítségre?
Ha segítségre van szüksége Audix ANTDA4161, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók TV antenna Audix
18 Augusztus 2024
Útmutatók TV antenna
- TV antenna Audiovox
- TV antenna Exibel
- TV antenna Thomson
- TV antenna Wilson Electronics
- TV antenna Digi
- TV antenna Metra
- TV antenna Hirschmann
- TV antenna IC Intracom
- TV antenna Kathrein
- TV antenna Zebra
- TV antenna Intellinet
- TV antenna Sencor
- TV antenna Icy Box
- TV antenna Wireless Solution
- TV antenna Icarus
Legújabb útmutatók TV antenna
30 Március 2025
28 Március 2025
28 Március 2025
27 Március 2025
27 Március 2025
27 Március 2025
26 Március 2025
8 Január 2025
8 Január 2025
8 Január 2025